7 October 2014 in Bioinspiration & Biomimetics
A soft-bodied robot made of smart soft composite with inchworm-inspired locomotion capable of both two-way linear and turning movement has been proposed, developed, and tested. The robot was divided into three functional parts based on the different functions of the inchworm: the body, the back foot, and the front foot. Shape memory alloy wires were embedded longitudinally in a soft polymer to imitate the longitudinal muscle fibers that control the abdominal contractions of the inchworm during locomotion. Each foot of the robot has three segments with different friction coefficients to implement the anchor and sliding movement. Then, utilizing actuation patterns between the body and feet based on the looping gait, the robot achieves a biomimetic inchworm gait. Experiments were conducted to evaluate the robot's locomotive performance for both linear locomotion and turning movement. Results show that the proposed robot's stride length was nearly one third of its body length, with a maximum linear speed of 3.6 mm s(-1), a linear locomotion efficiency of 96.4%, a maximum turning capability of 4.3 degrees per stride, and a turning locomotion efficiency of 39.7%.
5 March 2018 in ACS Applied Materials & Interfaces
1 September 2017 in Composite Structures
1 June 2020 in Soft Robotics
PSPablo Antonio Abrego Serrano
Pablo Antonio Abrego Serrano
This work described a bioinspired soft robotic finger with variable bending length to conform objects with different sizes by means of selectively varying the structural stiffness of its segments. The basic design is a shape memory alloy-based soft actuator with embedded stiffness-varying structures serving as modifiable endoskeletons. The stiffness-varying structure is composed of shape memory polymer (SMP) embedded with Nichrome (Ni-Cr) wires as heating elements. Joule heating of SMP through Ni-Cr wire inducing its phase change from the glassy state to the rubbery state enables the actuator structure change from the stiff state ( E = 125.65 MPa) to the compliant state ( E = 3.33 MPa). The Ni-Cr wire was designed with multiple solder tabs to enable the SMP that can be heated segmentally leading to the stiffness reduction of desired segments of finger to obtain different bendable lengths. A finger with three segments was fabricated, and its deformation and actuation force were measured based on different bendable lengths. A gripper was then assembled using two identical fingers where the angle between them can be manually adjusted. The angles for the two fingers with specific bending length were determined to enable them to form a closed configuration when maximum bending is reached. The grasping force of the gripper was then measured, and it was used to grip different objects. Results show that the performance of the gripper in gripping the size and weight of the object was markedly improved compared with the gripper that cannot vary its gripping length.
1 August 2016 in Composites Part B: Engineering
5 January 2017 in Advanced Functional Materials