We have examined an origin of the flatband voltage shift in metal-oxide-semiconductor capacitors by employing bilayer high- gate dielectrics consisting of and on the interfacial layer. We found that the high- interface affects the shift through an electrical dipole layer formation at its interface, regardless of the gate electrode materials. Furthermore, we demonstrated that the shift in the metal/high- gate stack is determined only by the dipole at high- interface, while for the Si-based gate it is determined by both gate/high- and high- interfaces.
We have fabricated Ge metal-insulator-semiconductor structures with ultrathin pure germanium nitride films by the direct nitridation of germanium (Ge) substrates. The plasma-enhanced nitridation technique was used with dc plasma source at low temperatures. Capacitance–voltage characteristics with no hysteresis and capacitance equivalent thickness of 1.23 nm have been achieved.
A nearly ideal Si(001) surface was prepared by a wet‐chemical method with a solution of HF:HCl=1:19 (pH<1). The surface was examined by scanning tunneling microscopy and was found to be covered by the uniform dihydride phase. Its successful preparation was the direct consequence of the following facts: The suppression of the (111) facet formation due to a low concentration of OH ions in the etchant solution and the stabilization of the surfaces structure due to the formation of the ordered steps.
The first atomic images of the hydrogen terminated Si(111) surface have been acquired in aqueous sulfuric acid solutions. The observed interatomic distance with threefold symmetry is ∼3.8 Å, indicating that the ideal Si(111):H‐1×1 surface can be prepared by chemical etching in NH4F solutions. It is demonstrated that insitu scanning tunneling microscopy is an extremely important method for revealing chemical processes with atomic resolution in the chemical etching of semiconductors in solutions.
The authors investigate the electrical properties of germanium nitride interfacial layers for germanium metal-insulator-semiconductor (Ge MIS) structures with high- dielectrics. A pure Ge nitride interfacial layer is fabricated by direct nitridation of a Ge substrate with the plasma processing before high- deposition. The interface trap density of niride/Ge MIS structures measured by the ac conductance method including the effect of the surface potential fluctuation is found to be as low as at the minimum. It is also found that Ge nitride interfacial layers mitigate the degradation of the accumulation capacitance during the high-temperature annealing.