27 November 2024 in IEEE Electron Device Letters
Photon absorption is a key factor for the transient output characteristics of silicon carbide photoconductive semiconductor switch (SiC PCSS), which is determined by the effective photo flux in the substrate. A high-purity 4H-SiC PCSS with a 1 mm gap is excited by a 532 nm laser pulse from different laser incidence planes. The results show that the output amplitude of the PCSS under the side trigger at 70 kV/cm is about 3.1 kV, which is 1.82 and 1.26 times higher than that of the front and back, respectively. Furthermore, 3D simulation indicates that the number of photo-generated carriers under the side trigger is one order of magnitude higher than that of the front and back. The efficient utilization and rapid enhancement of the electric fields make it exhibit better spatio-temporal characteristics during carrier transport processes.
30 November 2023 in Journal of Physics D: Applied Physics
As the main region where charged particles are accelerated by the electric field and accumulated near the cathode, the near-cathode region has significant non-local equilibrium characteristics and plays a crucial role in exploring the energy and mass transport properties of the thermal plasma from the arc column region to the hot cathode surface. However, there is a lack of universally adopted models and accepted theories for the study of the near-cathode region due to the complexity of the physical mechanisms involved in the sheath. According to the physical characteristics of the arc discharge, an external circuit is usually used to regulate the total current applied to the electrodes to maintain stable discharge. Therefore, the energy and mass transport properties of atmospheric thermal plasma driven by a current source coupled to an external circuit are investigated in this work to explore the transport mechanism of charged particles in the near-cathode region based on an implicit particle-in-cell Monte Carlo collision method. Firstly, the current-driven model in this work is compared with the present voltage-driven model and fluid model to verify the correctness of this model. Then, the collisions between charged particles and gas atoms inside the sheath are analyzed, and the spatial distributions of particle current density and particle heating rate inside the sheath are also studied. Finally, the variations of typical parameters of thermal particles under different current densities (106–107 A m−2) are analyzed, including maximum particle number density, maximum particle spatially-averaged temperature, sheath thickness, charge density and electric field strength in the cathode.
25 September 2024 in IEEE Transactions on Plasma Science
Recent studies have shown that the thermal emission from the cathode plays a crucial role in the basic research on microarc discharge. In this work, a 1-D implicit particle-in-cell coupled with the Monte Carlo collision (PIC-MCC) method is adopted to simulate thermal emission-driven microarc discharge at atmospheric pressure. Two thermal emission models—thermionic emission (TE) model and thermofield emission (TFE) model—are applied to contrast and analyze the particle transport phenomena of thermal microplasma. Considering that the local electric field near the cathode affects the current densities and ionization can create sufficient space charge to modify the electric field, different current densities at the cathode and their contribution to the total current densities are evaluated under various conditions, including cathode temperatures ( T $_{\text{C}}$ $=$ 2500 $\sim$ 3500 K), applied voltages ( U $=$ 1 $\sim$ 30 V), and gap sizes ( d $=$ 10 $\sim$ 100 $\mu$ m). The electric field, maximum number density, and spatially averaged temperature of charged particles are also examined to study the interaction between thermal emission and discharge physics. Furthermore, the effects of secondary electron emission are analyzed to accurately predict electron emission in the microarc discharge. The results indicate the difference between thermal microplasma generated by TE and TFE becomes more pronounced as the gap size decreases, the cathode temperature increases, and the applied voltage increases due to the enhanced field emission (FE). In addition, gas breakdown occurs at a relatively lower voltage of 17 V for the two emission models because of the ion-enhancement effect. There exists a maximum at d $=$ 30 $\mu$ m in current density at the cathode due to the difference between collision mean free path of electron and gap sizes. Besides, the secondary electron emission becomes more pronounced at higher cathode temperatures and larger secondary electron emission coefficients.
6 February 2026 in IEEE Photonics Technology Letters
The limited utilization efficiency of extrinsic triggering remains a major constraint on the performance of GaAs photoconductive semiconductor switches (PCSS). In this work, the transient output characteristics of a single opposed-contact GaAs PCSS under extrinsic dual-beam synchronous triggering are investigated, assuming uniform optical energy splitting. Measurements within the 2-3.5 kV bias range indicate that dual-beam triggering effectively enhances the output pulse amplitude compared with single-beam triggering. Specifically, at a bias voltage of 3 kV, the amplitude reaches approximately 2.73-fold that of the single-beam case. Simulated spatial distributions of photogeneration rate and current density further reveal the underlying mechanism of enhanced photoconductivity with dual-beam triggering. These results offer valuable insights into optimizing the triggering strategy to enhance the efficiency and performance of GaAs PCSS under extrinsic triggering.
1 October 2024 in Physics of Fluids
Coulomb collisions are important transport processes of charged particles and should not be neglected in atmospheric thermal microplasmas due to the high density of charged particles. However, there have been a few attempts at Coulomb collisions in atmospheric thermal microplasmas, and it is still unclear how to couple Coulomb collisions between different charged particles with collisions between charged particles and neutral atoms. This work proposes a Coulomb collision model based on the collision cross section, which is more computationally efficient than the typical Nanbu model and TA (Takizuka and Abebinary) model by reproducing the anisotropic electron–electron collision process. Then, the effects of Coulomb collision on the kinetic parameters and electron dynamics of atmospheric thermal microplasmas are investigated by coupling the implicit particle in cell and Monte Carlo collision (PIC MCC) method. It is found that the existence of electron–electron and electron–ion collisions reduces the particle number density in the bulk-plasma region. The electron–electron collisions are stronger than the electron–ion collisions and the ion–ion collisions can be ignored. The Coulomb collisions increase the dispersion of electron energy in the high-energy region.
1 November 2026 in IEEE Transactions on Electron Devices