17 April 2021 in International Journal of Energy Research
19 May 2022 in Energy & Environmental Science
A structure-mechanism-performance relationship of metal-free carbon catalysts for outstanding H2O2 production activity and selectivity in alkaline media.
22 August 2022 in JACS Au
Growing the hydrogen economy requires improving the stability, efficiency, and economic value of water-splitting technology, which uses an intermittent power supply from renewable energy sources. Alkaline water electrolysis systems face a daunting challenge in terms of stabilizing hydrogen production under the condition of transient start-up/shut-down operation. Herein, we present a simple but effective solution for the electrode degradation problem induced by the reverse-current under transient power condition based on a fundamental understanding of the degradation mechanism of nickel (Ni). It was clearly demonstrated that the Ni cathode was irreversibly oxidized to either the β-Ni(OH)2 or NiO phases by the reverse-current flow after shut-down, resulting in severe electrode degradation. It was also determined that the potential of the Ni electrode should be maintained below 0.6 VRHE under the transient condition to keep a reversible nickel phase and an activity for the hydrogen evolution reaction. We suggest a cathodic protection approach in which the potential of the Ni electrode is maintained below 0.6 VRHE by the dissolution of a sacrificial metal to satisfy the above requirement; irreversible oxidization of the cathode is prevented by connecting a sacrificial anode to the Ni cathode. In the accelerated durability test under a simulated reverse-current condition, lead was found to be the most promising candidate for the sacrificial metal, as it is cost effective and demonstrates chemical stability in the alkaline media. A newly defined metric, a reverse-current stability factor, highlights that our system for protecting the cathode against the reverse-current is an efficient strategy for stable and cost effective alkaline hydrogen production.
6 April 2022 in Journal of Power Sources
17 March 2023 in Advanced Functional Materials
The development of highly active and durable Ir‐based electrocatalysts for the acidic oxygen evolution reaction (OER) is challenging because of the corrosive anodic conditions. Herein, IrOx/Zr2ON2 electrocatalyst is demonstrated, employing Zr2ON2 as a support material, to overcome the trade‐off between the activity and stability in the OER. Zr2ON2 is selected due to its excellent electrical conductivity and chemical stability, and the fact that it induces strong interactions with IrOx catalysts. As a result, IrOx/Zr2ON2 electrocatalysts exhibit outstanding OER performances, reaching an overpotential of 255 mV at 10 mA cm−2 and a mass activity of 849 mA mgIr−1 at 1.55 V (vs the reversible hydrogen electrode). The activity of IrOx/Zr2ON2 is maintained at 10 mA cm−2 for 5 h, while in contrast, IrOx/ZrN and an unsupported IrOx catalyst undergo drastic degradation. Combined experimental X‐ray analyses and theoretical interpretations reveal that the reduced oxidation state of Ir and the extended IrO bond distance in IrOx/Zr2ON2 effectively increase the activity and stability of IrOx by altering reaction pathway from a conventional adsorbate evolution mechanism to a lattice oxygen‐participating mechanism. These results demonstrate that it is possible to effectively reduce the Ir content in OER catalysts through interface engineering without sacrificing the catalytic performance.
1 November 2021 in Journal of Power Sources