The reactions taking place during voltametric cycling of manganese oxides can be determined using in situ Raman spectroscopy. The main difficulty for the oxide identification is to obtain relevant Raman reference spectra because of the many possible compounds and, for some of these compounds, of their instability in the laser beam. As a consequence, several modifications of different tetra-, tri- and divalent manganese oxides and oxyhydroxides were carefully studied. The electrochromic behavior of three types of manganese oxides, two prepared by thermal oxidations and the other by electrochemical deposition, were then compared. The presence of nonstoichiometry in the pristine material was necessary to obtain a reversible electrochromic effect. The reaction during electrochromic cycling is more complicated than a simple passage from MnO2 to MnOOH
Prussian blue (PB) particles with the size of ca. 5 nm were synthesized and immobilized in a multilayer structure, as a strategy for the potential development of an amperometric transducer for oxidase-enzyme-based biosensors. Multilayer films composed of PB and poly(allylamine hydrochloride) (PAH) were prepared via layer-by-layer (LbL) sequential deposition. The process was carefully monitored by UV–vis spectroscopy and cyclic voltammetry. The increase of the redox current peaks during the layer-by-layer deposition demonstrated that charge propagation within the film occurs. Linear increase of UV–vis absorbance with the number of deposited bilayers indicates that well-organized systems have been elaborated. ITO electrodes coated with PB/PAH films were used successfully for detecting H2O2, sensitivity being dependent on the number of PB/PAH layers.