28 December 2023 in IEEE/ASME Transactions on Mechatronics
Moving rapidly and agilely in high-pressure environment is a challenge for existing miniature underwater robots, which limits deeply the ocean exploitation. Here, we present a spherical underwater robot with diameter of 7 cm, and it has merits of miniature structure without bulky and antihydropressure devices, 3-DOFs agile motion, and good adaptability for 25 MPa environment simultaneously. Four designed piezoelectric double-jet actuators are embedded directly in the spherical shell without transmission mechanism, which enables the robot with relatively fast motion speed by compared with the published robots. Six motion modes are implemented by the cooperation of actuators, including rising, hovering, and sinking motions in the vertical direction and straight driving, turning, and in-situ turning motions in the horizontal plane. A robot prototype was fabricated, and its performance was tested. Experimental results indicated that the rising, straight driving, and in-situ turning speed reached up to 95.2 mm/s (1.36 BL/s), 99.6 mm/s (1.42 BL/s), and 5 rad/s, respectively. Besides, the robot could also rapidly turn at 1.3 rad/s with the turning radius of 22.1 mm. The speed deviation within 10% under different water pressures was obtained. The obstacle avoidance was successfully fulfilled by controlling the robot to pass through the narrow gap with width of only 1.5 body length of robot. There excellent characteristics demonstrate agile mobility and give the robot ability to move in the confined area of deep sea.
17 May 2024 in IEEE Transactions on Industrial Electronics
Wireless motion and miniature size are two essential features for deep-sea robots applying in the practical confined area, which are incompatible due to the existence of onboard power supply and anti-pressure devices. Here, inspired by the energy-saving hitchhiking behavior of marine remora, we propose a piezoelectric-jetting father–son robot with size of Φ 14 3 13 cm 3 . The untethered father robot provides power for the adsorbed 5-cm-length son robot, and the micro agile son can detach to freely move in the small space that is inapplicable for father. The structural shapes of lateral jetting unit are optimized by numerical simulation and the corresponding flow field characteristics are elaborated to assist the optimization analysis. Then, the pressure-resilience electronics circuits are designed, and it can normally output high-frequency square wave of 210 V p-p and excite the father–son robot to implement the wireless 3-DoF motions under 20 MPa environment. Finally, two robots cooperate to detect a cornering channel with width of close to father diameter, and the son recombines the father and together return voyage after the son achieves the multiple high-difficulty movements in such a narrow channel. This work can supply solution of developing the underwater robot in complex deep-sea occasions.