Flexible sensors in wearable electronics have become increasingly multifunctional due to the development of materials synthesis and structure design. In particular, structural design can not only add capabilities to sensors fabricated from existing available and normal materials, but also offer opportunities for the fabrication of sensors with certain desired functions. Here, we designed a series of fiber-junction structure models, in which two fibers were simply hooked to each other to form a junction on a flexible printed circuit, for fabrication of directional bending sensors. The value and direction of bending angle are related to the change in electronic signal by a theoretical expression, allowing us to employ a simple and practicable method to use available conductive fiber materials to fabricate high-sensitivity, high-resolution and directional bending sensors. In addition, these models are generally applicable, which have broad combination with different conductive fiber, and corresponding bending sensors all possess capability of directional identification. Furthermore, the capability of identifying directional bending was demonstrated by human motion monitoring such as joint bending and muscle contraction.
Electronic skin (E-skin) has attracted considerable attention for simulating the human sensory system for use in prosthetics, human–machine interactions, and healthcare monitoring. However, it is still challenging to fully mimic the skin function that can de-couple stimuli such as normal/tangential forces, contact/non-contact behaviors, and react to high-frequency inputs. Herein, we propose fully bionic E-skin (FBE-skin), which consists of a magnetized micro-cilia array (MMCA), a micro-dome array (MDA), and flexible electrodes to completely duplicate the hairy layer, epidermis/dermis interface, and subcutaneous mechanoreceptors of human skin. The optimized MDA and interdigital electrode enable the FBE-skin to perceive static forces with a linear sensitivity of 96.6 kPa−1 up to 100 kPa, while the branch of electromagnetic induction allows the FBE-skin to sensitively capture dynamic stimuli with vibrating signals up to 100 Hz. The top-down integration of MDA and MMCA not only replicates the three-dimensional structure of human skin, but also synergistically provides the FBE-skin with bionic rapidly adapting (RA) and slowly adapting (SA) receptors. Consequently, the FBE-skin is capable of perceiving dynamic/static, normal/tangential, and contact/non-contact stimuli with a broad range of working pressures and frequencies. We expect that the design of FBE-skin will be promising for widespread applications from intelligent sensing to human–machine interactions.
A humanoid robot is an advanced representation of robot techniques. It can move like a human and possesses the ability to use human tools. Sensing and intelligent control technologies have increased the intelligence of humanoid robots. However, the dexterity of a humanoid robot is still far from that of a human. Herein, a bending sensor is introduced to detect human motion, which can thus be digitized to enable a humanoid robot to learn to be more dexterous. This bending sensor is fabricated of carbon fiber with a cascade structure, resulting in excellent characteristics, including a quantitative detection capability, high gauge factor, low hysteresis, long‐term durability, and high‐frequency response. Thus, the bending sensor can recognize both the large‐scale motion of joint bending and subtle motion of muscle contraction. Fourteen bending sensors corresponding to the 14 knuckles of the human hand can accurately recognize and digitize hand gestures. These multichannel sensors are combined with nine additional bending sensors to comprehensively digitize the grasping process of the upper limb and recognize the grasping of objects with different sizes and weights. These successful applications demonstrate that the bending sensor can open a path toward learning human behavior for a humanoid robot.
Flexible conductive foam-based pressure sensors, as a crucial component of wearable electronics, have garnered extensive attention in the fields of soft robotics and human–machine interaction due to their light weight, simple fabrication process and low cost. The majority of published studies, however, have focused on their foundational mechanical sensing properties including high sensitivity, wide detection range, etc., while ignoring the instability caused by low interfacial bonding strength between conductive fillers and foam skeleton, as well as the external environment in practical applications. Herein, through surface modification and interfacial microstructure design, a piezoresistive foam-type pressure sensor with high sensitivity and high stability is developed. The synergistic effect of the combination of surface modification and interfacial microstructure endows the sensor with great sensitivity (14.16 kPa−1 for the pressure range of 0–5 kPa), a low limit of detection (∼6.3 × 10−6 kPa), and exceptional durability (over 13 000 compression/recovery cycles). Furthermore, a wireless pressure acquisition system based on a 5 × 5 piezoresistive foam-type sensor array is developed, which can accurately recognize the spatial pressure distribution of the placed objects. This work presents a straightforward approach for realizing the trade-off between sensitivity and stability of conductive foam-based sensors, paving the way for their practical applications in wearable electronics, bionic robots, and other fields.