10 June 2016 in Nature Communications
The interaction between light and acoustic phonons is strongly modified in sub-wavelength confinement, and has led to the demonstration and control of Brillouin scattering in photonic structures such as nano-scale optical waveguides and cavities. Besides the small optical mode volume, two physical mechanisms come into play simultaneously: a volume effect caused by the strain-induced refractive index perturbation (known as photo-elasticity), and a surface effect caused by the shift of the optical boundaries due to mechanical vibrations. As a result, proper material and structure engineering allows one to control each contribution individually. Here, we experimentally demonstrate the perfect cancellation of Brillouin scattering arising from Rayleigh acoustic waves by engineering a silica nanowire with exactly opposing photo-elastic and moving-boundary effects. This demonstration provides clear experimental evidence that the interplay between the two mechanisms is a promising tool to precisely control the photon–phonon interaction, enhancing or suppressing it.
21 February 2018 in Optics Letters
We propose a fast and non-destructive method to characterize the absolute diameter and uniformity of micrometer-scale fiber tapers using a pump and probe forward Brillouin scattering setup. The fundamental torsional-radial acoustic mode supported by the wire is excited using a pulsed pump laser and oscillates at a frequency that is inversely proportional to the taper waist diameter. This standing time-varying torsional-radial wave induces polarization modulation on a probe signal, whose spectrum structure reveals the sample diameter and its non-uniformity. By comparing our results with measurements using scanning-electron microscopy, a relative deviation of 1% or less was demonstrated, and diameter non-uniformity of less than 0.5% could be detected.
11 November 2013 in Applied Physics Letters
Photonic molecules (PMs) based on multiple inner coupled microring resonators allow to surpass the fundamental constraint between the total quality factor (QT), free spectral range (FSR), and resonator size. In this work, we use a PM that presents doublets and triplets resonance splitting, all with high QT. We demonstrate the use of the doublet splitting for 34.2 GHz signal extraction by filtering the sidebands of a modulated optical signal. We also demonstrate that very compact optical modulators operating 2.75 times beyond its resonator linewidth limit may be obtained using the PM triplet splitting, with separation of ∼55 GHz.
14 November 2024 in ACS Photonics
28 August 2009 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
InGaAsP/InP quantum well ridge waveguide lasers were fabricated for the evaluation of Ga+ focused ion beam milling of mirrors. Electrical and optical properties were investigated. A 7% increment in the threshold current, a 17% reduction in the external quantum efficiency, and a 15 nm blueshift in the emission spectrum were observed after milling as compared to the as-cleaved facet result. Annealing in inert atmosphere partially reverts these effects, resulting in a 4% increment in the threshold current, an 11% reduction in the external efficiency, and a 13 nm blueshift with the as-cleaved result. The current-voltage behavior after milling and annealing shows a very small increase in leakage current, indicating that optical damage is the main effect of the milling process.
1 March 2021 in APL Photonics
We investigate intermodal forward Brillouin scattering in a solid-core photonic crystal fiber (PCF), demonstrating efficient power conversion between the HE11 and HE21 modes, with a maximum gain coefficient of 21.4 W−1 km−1. By exploring mechanical modes of different symmetries, we observe both polarization-dependent and polarization-independent intermodal Brillouin interaction. Finally, we discuss the role of squeeze film air damping and leakage mechanisms, ultimately critical to the engineering of PCF structures with enhanced interaction between high-order optical modes through flexural mechanical modes.