1 December 1998 in Applied Optics
A method for direct shape measurement with short laser light pulses and digital holography with a CCD array is proposed. An in-line holographic setup is used in which the reference beam is reflected from a blazed reflection grating, i.e., a Littrow setup. By this method a relatively large optical delay is created between the reference and the object beams even with a small object–reference angle, which is necessary because of the limited resolution of the CCD. The delay varies continuously across one axis of the CCD array. In this way different object sections are reconstructed from different parts of the CCD, which in turn correspond to a certain path length from the object. By putting the sections together, one can evaluate the three-dimensional shape. Theoretical as well as experimental results are presented.
30 September 2011 in Applied Optics
A Raman multispectral imaging technique is presented, which can be used for stand-off detection of single explosives particles. A frequency-doubled Nd:YAG laser operating at illuminates the surface under investigation. The backscattered Raman signal is collected by a receiver subsystem consisting of a Schmidt–Cassegrain telescope, a laser line edge filter, a liquid-crystal tunable filter, and a gated intensified charge-coupled device (ICCD) detector. A sequence of images is recorded by the ICCD, where, for each recording, a different wavelength is selected by the tunable filter. By this, a Raman spectrum is recorded for each pixel, which makes it possible to detect even single particles when compared to known spectra for possible explosives. The comparison is made using correlation and least-square fitting. The system is relatively insensitive to environment and light variations. Multispectral Raman images of sulfur, ammonium nitrate, 2,4-dinitrotoluene, and 2,4,6-trinitrotoluene were acquired at a stand-off distance of . Detection of sulfur particles was done at a distance of .
1 November 2003 in Optics and Lasers in Engineering
1 June 2000 in Applied Optics
A method for measurement of continuous displacements that uses phase-shifting speckle interferometry is presented. The initial random phase of the speckle pattern is evaluated by phase shifting before deformation. The changing phase thereafter is evaluated from only one image at a time by a least-squares algorithm. The technique can be used for measuring transients and other dynamic events, heat expansion as well as other phenomena, for which it is difficult to accomplish phase shifting during deformation. Theory along with computer simulations and experimental results are described.
1 January 2000 in Optical Engineering
A new concept for 3-D shape measurement of complex objects is proposed, which is based on photogrammetry and fringe projection. The shape of a partial view is determined by a combination of the phase-shift method for fringe evaluation and a photogrammetric triangulation to calculate the 3-D coordinates related to the sensor coordinate system. For the measurement of complex objects, partial views are taken from different sensor positions. The problem of matching the partial views into each other is solved by transforming each sensor position and the relating point cloud of the shape in a global coordinate system by photogrammetric matching of reference targets.
1 January 1992 in CIRP Annals