A micro-mesoporous composite consisting of ZSM-5 zeolite and halloysite aluminosilicate nanotubes preliminarily treated with sulfuric acid was prepared and studied. The textural and structural characteristics of the composite, support, and catalyst based on it were examined by transmission electron microscopy, X-ray fluorescence elemental analysis, low-temperature nitrogen adsorption, and temperature-programmed ammonia desorption. The activity and selectivity that the Pt-containing catalyst based on the composite material obtained exhibits in isomerization of the C-8 aromatic fraction were evaluated. The results obtained using the micro-mesoporous catalyst under varied process conditions (temperature, feed space velocity) were compared to those obtained with the commercial catalyst. The micro-mesoporous catalyst Pt/ZSM-5 + Т-HNT/Al2O3 ensures quantitative conversion of ethylbenzene and increased, compared to the commercial analog, content of the para isomer in the mixture of xylenes at 360°С, feed space velocity of 6 h–1, hydrogen pressure of 1.0 MPa, and Н2/feed ratio of 1200 Ln.c. L–1.
A methanol conversion catalyst based on natural aluminosilicate nanotubes and H–ZSM-5 zeolite was synthesized. Its textural, structural, and acid properties were studied by low-temperature nitrogen adsorption–desorption, transmission electron microscopy, X-ray diffraction analysis, and temperature-programmed ammonia desorption. The influence exerted on the methanol conversion and product distribution by the reaction temperature (380–460°С), pressure (0.1–0.5 MPa), and feed space velocity (0.5–1 h–1) was studied. The catalyst based on halloysite aluminosilicate nanotubes showed high selectivity in formation of both lower olefins and aromatic hydrocarbons.
The composition, structure, catalytic activity, and stability of ruthenium catalytic systems prepared using natural aluminosilicate nanotubes as a support were studied. The influence of the preparation procedure on the morphology of ruthenium nanoparticles selectively formed inside mesoporous aluminosilicate nanotubes was examined. The activity and stability of catalysts in the model reaction of benzene hydrogenation in the presence of water [V(C6H6) = V(H2O), 80°C, hydrogen pressure 3.0 MPa, reaction time 3 h] were studied. The catalyst containing 1.02 wt % ruthenium, prepared by reduction of the ruthenium ethylenediaminetetraacetate complex in a hydrogen stream at 400°С, exhibits higher activity (the benzene conversion in the 3-h reaction was 100%) and higher stability in the reaction (the benzene conversion after three reaction cycles was 95%) compared to the system with the similar ruthenium content (0.98 wt %) prepared by reduction with a sodium borohydride solution. The reduction with hydrogen leads to the formation of highly stable ruthenium nanoparticles with the mean diameter of 2 nm, tightly bound to the internal surface of aluminosilicate nanotubes.
The paper comparatively assesses the physicochemical properties of natural aluminosilicate nanotubes (halloysite) provided by domestic (HNT-Ch) vs. foreign (HNT-A) manufacturers, as well as the catalytic activity of ruthenium catalysts synthesized therefrom. The composition, structure, and textural properties of the materials were measured by a combination of physicochemical methods, such as TEM, ED–XRF, low-temperature nitrogen adsorption/desorption, and H2–TPR. The activity of the synthetic catalysts was examined in benzene hydrogenation at 80°C and a hydrogen pressure of 3 MPa in both a hydrocarbon and aqueous–hydrocarbon system. The catalysts supported on HNT-Ch and HNT-A were found to have similar physicochemical properties and to exhibit high activity in benzene hydrogenation, both in the monophasic and biphasic systems, thus ensuring quantitative substrate conversion with 100% cyclohexane selectivity.