5 October 2023 in IEEE Transactions on Industrial Electronics
Magnetic springs using permanent magnets (PMs) have shown advantages in various fields. For instance, they are integrated into precision positioning actuators for passive gravity compensation, as well as into precision vibration isolators to reduce dynamic stiffness. In this article, an inverse design method of magnetic springs is proposed, which enables to customize the force–displacement relationship by shaping PMs. First, a concept of modulated magnetic spring is introduced, whose stator PMs are nonuniformly magnetized. The modulation method is developed to customize the force–displacement relationship. Second, uniformly magnetized PMs are shaped layer by layer to substitute the modulated PM. This process involves optimizing the size of each layer independently to generate a nearly equivalent force, resulting in a highly manufacturable special-shaped magnetic spring. Three design examples are presented and tested. The first two examples maintain a constant force and a constant negative stiffness, respectively, within 30 mm. The relative errors are only 3.7% and 2.3%, respectively, which are defined as the ratio between the maximum deviation and the mean value. The third example can compensate for the nonlinear force of the subsidiary structures and maintain a constant resultant force in 40 mm with a relative error of 2.9%. This method is confirmed to customize the force–displacement relationship for various applications.
27 May 2025 in International Journal of Mechanical Sciences
13 January 2026 in IEEE/ASME Transactions on Mechatronics
Exploring small celestial bodies, such as asteroids, opens new avenues for space exploration, complementing lunar and Martian missions. However, the microgravity environment (∼10−5g) presents significant challenges, particularly for landing. Accurate prelaunch testing of mechanical and control systems is crucial to ensure mission success. Therefore, the ground-based microgravity physical simulation is essential, particularly for accurately replicating its microgravity collision response. However, existing microgravity simulations fail to accurately replicate landing collision response, particularly in the vertical direction. In this article, an air-bearing simulation system with quasi-passive vertical compensation is presented, enabling 6-DOF simulation. The vertical compensation integrates a quasi-zero stiffness unit for passive gravity compensation, complemented by an active following mechanism for extended compensation stroke. The controller is specifically adjusted to generate the vertical virtual mass, ensuring equal added mass in all three directions and eliminating systematic errors. Vertical tests confirm that the system effectively simulates free-floating conditions for the lander simulator up to 1 ton and accurately responds to forces as small as 1 N. The proposed 6-DOF physical simulation system provides a novel technical approach and has been implemented in the ground verification of the Tianwen-2 exploration mission.