25 December 2020 in IEEE Transactions on Transportation Electrification
This article introduces an 8/6, three-phase, modular and crooked-tooth translator linear switched reluctance motor (MCTLSRM) with active and lateral translator structure. First, the topology, its distinctive innovations, and the crooked-tooth angle investigation of the proposed motor are represented. Then, 2-D and 3-D finite element analysis (FEA) is employed to study and compare the static magnetic characteristics and dynamic performance of the proposed motor with its counterparts, conventional linear switched reluctance motor (CLSRM) and modular translator linear switched reluctance motor (MTLSRM). The FEA results indicate the supremacy of the MCTLSRM in terms of the flux linkage, average thrust, and thrust ripple over CLSRM and MTLSRM. Moreover, because of the lighter weight of the MCTLSRM, it achieves an intensified average thrust per weight compared to its counterparts. Finally, the MCTLSRM is prototyped, and the experimental results are extracted in the laboratory. The experimental outcomes elucidate a satisfactory agreement with those obtained from the simulations.
8 March 2022 in IEEE Transactions on Transportation Electrification
This article introduces an innovative modular and split-tooth linear hybrid reluctance motor (MLHRM) with embedded PMs to achieve improved performance of linear switched reluctance motors (LSRMs). First, three new motor structures are introduced, including two, three, and four teeth per pole MLHRMs (MLHRM2, MLHRM3, and MLHRM4). Then, the operating principles of the proposed motors are studied through the flux path of windings and PMs, and the impact of the PMs on the MLHRM’s performance is investigated via a magnetic equivalent circuit (MEC). Third, using the extracted relations among the motors’ parameters, classic design equations of the SRM, and the genetic algorithm (GA), the proposed motors are optimized and compared through finite element analysis (FEA). The results indicate the superior performance of the MLHRM2 over MLHRM3 and MLHRM4. The static and dynamic performance of MLHRM2 is compared with the modular and split tooth LSRM (MLSRM2) and the conventional modular LSRM (MLSRM1) in the fourth step. The simulation results show the superior performance of MLHRM2 over MLSRM2 and MLSRM1. Finally, the proposed MLHRM2 is prototyped, and the experimental results are obtained in both the presence and absence of the PMs. The experimental results verify the simulation results with an acceptable agreement.
4 June 2025 in IEEE Transactions on Transportation Electrification
Axial flux permanent magnet (AFPM) machines with entirely or stator coreless configurations offer significant advantages, including low rotational losses, the absence of cogging torque, minimal torque ripple, and the potential for high specific power density. Advances in permanent magnet (PM) technology and cooling techniques have enabled fully coreless AFPM machines to achieve high magnetic and current loadings without core saturation, making them suitable for high-performance applications like electric aircraft propulsion. This article reviews recent advancements in coreless AFPM machines, tracing their historical and chronological development. Various topologies, including single- and double-sided and multidisk designs, are examined to identify the advantages and emerging trends in each configuration. Different winding configurations are compared, and their performance characteristics are discussed. Recent innovations in winding materials, such as printed circuit boards (PCBs), are highlighted. The rotor configurations are reviewed, with a focus on the development of flux density equations and specific attention to the Halbach array PM rotor due to its relevance for electric aircraft propulsion. The article also discusses electromagnetic modeling techniques, including proposed analytical and 2-D approaches that reduce the computational burden of traditional 3-D calculations. Sources of power loss are identified, along with mitigation strategies based on existing literature. A preliminary design procedure and sizing evaluation are presented, utilizing analytical torque and back electromotive force (B-EMF) calculations through an equivalent 2-D linear model. Finally, recent advancements in electric machines designed for aircraft propulsion are reviewed, showcasing their electromagnetic performance and highlighting the potential benefits of coreless machines in this field.
9 June 2025 in IEEE Transactions on Industry Applications
This paper presents a comprehensive analysis of the feasibility, cost, and electromagnetic performance of five distinct types of axial flux permanent magnet (AFPM) generators designed for direct-drive wind turbines. The generator configurations investigated include a single-sided AFPM generator with a surface-mounted PM rotor (AFPMG), a double-sided AFPM generator featuring PMs on the stator and a reluctance rotor (AFPMG-RR), a coreless stator AFPM generator with surface PMs (CAFPMG-SPM), and a coreless stator AFPM generator with a Halbach PM array rotor (CAFPMG-Hal). Each generator’s operating principles and configurations are thoroughly explained and compared. Large-scale multi-objective design optimizations were conducted on each type, taking advantage of symmetric computational models and using a differential evolution algorithm based on 3D finite element analysis (FEA) to minimize cost and mass while maximizing efficiency for all designs. A comprehensive discussion of the optimization results highlights the merits of each configuration. The findings indicate and confirm that AFPM generators can potentially achieve superior performance compared to their radial counterparts, as reported in the literature, while also benefiting from more robust and compatible mechanical integration with wind turbines.