30 April 2021 in Lighting Engineering & Power Engineering
The paper analyzes the current state of the energy system of Ukraine and the efficiency of generation and transmission of electricity. The analysis of the best world practices shows that the active development of modern technologies of energy accounting allows: to bring to a fundamentally new level the quality of data collection and analysis of consumers’ energy consumption; increases the efficiency of operational management of energy assets; promotes the active involvement of energy consumers in the processes of regulating their own energy consumption. Ukraine's energy system has been in operation for quite a long time, and it is difficult for it to withstand the load of modern times. The high level of wear of the main and auxiliary equipment of the power system and the uneven distribution of load in the network often lead to emergencies and power outages to consumers. Undoubtedly, increasing the efficiency of electricitygeneration and supply is an important and urgent task for Ukraine's energy sector. One of the modern and innovative concepts that can significantly affect the quality of electricity transmission is Smart Grid technology. This technology and its capabilities are not new. But the problems that accompany the widespread introduction of Smart Grid in the energy market of Ukraine do not have an unambiguous and effective solution. In this regard, this paper proposes to consider and discuss several scenarios for the implementation of Smart Grid in Ukraine, with an overview of their advantages and disadvantages. In particular, this is a scenario of monitoring and point-by-point implementation of certain Smart Grid technologies; scenario of development of existing and creation of new competencies in the field of Smart Grid; scenario of development and re-implementation of a comprehensive national program of innovative development of electric power on the basis of the Smart Grid concept. The ways of mathematical formulation of the Smart Grid optimization problem using the Data Science approach based on the machine learning system and neural networks are determined separately. These include Big Data processing methods, Data Mining, statistical methods, artificial intelligence methods, and Machine Learning. Data Science includes methods of designing and developing databases and application software. The main practical purpose of the scientist's work is to extract useful information for business from large arrays of information, identify patterns, develop and test hypotheses by modeling and developing new software, and therefore are necessary and sufficient conditions for theoretical justification of practical implementation of Smart Grid in Ukraine.
29 October 2021 in Lighting Engineering & Power Engineering
The formation of the concept of Smart Grid is associated with a number of issues, including theoretical and methodological. One of the main problems in forming such theory is to build its basis, the starting point for the development of which is the definition of Smart Grid as a systems of views concept on the future of power engineering, the principles of operation and technological basis of which undergoes significant changes compared to modern energy. The paper is aimed at reviewing and developing directions and approaches to the definition of Smart Grid in combination with machine learning mechanisms, highlighting their diverse and common nature to develop a holistic innovative energy development. In this paper, a study of the energy sector in Ukraine was conducted. Its efficiency and innovative development are considered. Problems with the implementation of Smart Grid technology, which arise when using alternative sources and monitoring and administration systems, were highlighted. The ways of mathematical formulation of the Smart Grid optimization problem are determined using the Data Science approach based on the machine learning system and neural networks. Big Data processing methods, Data Mining, statistical methods, artificial intelligence methods, and Machine Learning are analyzed. The design and development of databases and application software will be done using the Data Science method. Smart-technologies will take over the processes of control, accounting and diagnostics of assets, which will provide promising opportunities for self-recovery of the power system, as well as efficient operation of fixed assets. With the introduction of Smart Grid technologies for the Ukrainian power industry, significant fundamental changes will take place. This is the transition from centralized methods of generation and transmission of electricity to distributed networks with the ability to control energy production facilities and network topology at any point, including at the consumer level. Replacement of centralized demand forecasting according to the methodology of active consumer influence becomes an element and subject of the management system. A high-performance information and computing infrastructure will be built as the core of the energy system. This approach creates the preconditions for the widespread introduction of new devices that increase the maneuverability and controllability of the equipment. The creation of next-generation operational applications (SCADA/EMS/NMS) allows the use of innovative algorithms and methods of power system management, including its new active power elements.
28 October 2022 in Lighting Engineering & Power Engineering
Ensuring reliable electricity supply to consumers in isolated and distributed energy systems can be achieved through grid connection, the use of energy storage systems for generation, or creating conditions for consumption control, including the installation of energy storage for consumers. This article explores various methods to enhance the reliability of electricity supply to consumers from power plants based on renewable energy sources (RES). The paper presents a mathematical model and optimization algorithm for the operation of a hybrid energy complex, implemented in the MATLAB/Simulink environment. The model takes into account the influence of various factors on its operational modes and has been tested through a series of calculations, confirming its efficiency and adequacy. The proposed methods and results can be applied in designing energy supply systems for remote and inaccessible re- gions, as well as in distributed energy system nodes. The paper also discusses the use of a hydrogen generator as an alternative energy source and provides insights into the properties of hydrogen, methods of production, prospects, and challenges of hydrogen energy. It offers an overview of the most common methods of hydrogen and other substance extraction, with a primary focus on water electrolysis. The simulation model also considers the performance of the hydrogen generator, a vital component of the hybrid energy supply system. The hydrogen generator produces hydrogen from water through electrolysis, which can be optimized based on input energy and water supply. The energy storage system, including battery banks, is also modeled to monitor energy storage and delivery processes during periods of high and low demand. The conclusions of this article encompass a mathematical model and optimization algorithm for the operational modes of a hybrid power plant based on renewable energy sources with a hydrogen generator and an energy storage system. The proposed methods and results can be valuable in designing energy supply systems for consumers in remote and distributed energy systems.
28 October 2022 in Lighting Engineering & Power Engineering
The paper shows the implementation of simulation models of an electromechanical energy converter on the example of an induction motor with a squirrel-cage rotor in the SciLab environment and its graphic library Xcos for building structural diagrams. Despite the existence of simulation programs such as Simulink and ANSYS Twin Builder, SciLab is completely free, which is an advantage for use in an academic environment and in scientific research. Despite SciLab being free and significantly different from existing paid software, this program allows to create complex models and has a powerful built-in programming language. This paper shows how, using SciLab blocks, to build a simulation model of an induction motor with a squirrel-cage rotor, based on the differential equations of electromagnetic transients. The construction of models for the mode of direct start from a source of stable three-phase power supply is considered. An example of a code program in SciLab for determining the parameters of an induction motor with a squirrel-cage rotor, necessary for simulation, only from the motor rated data, is shown separately. The work will be useful to researchers who intend to use free software to solve complex problems.
25 December 2023 in Lighting Engineering & Power Engineering
Multifunctional energy converters (MFEC) are induction motors with an external hollow solid rotor. Structurally, the MFEC is an electric machine in which the stator has the appearance of a conventional winding rotor and is located in a steel tube, which performs the functions of the rotor. In normal use for an electric motor, this design is inefficient due to significant losses in the solid rotor due to eddy currents. In the case of the MFEC, all losses go to the heating of the loose material that moves along the surface of the solid rotor, so the efficiency of the MFEC is very high. The non-standard design of the MFEC raises a number of questions regarding the calculation of such an electric machine and the mathematical modeling of transient modes: start-up in idle mode, start-up under load, operation during long-term parking under current, random load change during operation, etc. The complexity is caused by taking into account the given parameters of the solid rotor during the change of slip and currents. On the one hand, the currents in the rotor affect the parameters of the solid rotor, on the other hand, these currents cannot be calculated without determining the parameters of the rotor. In this regard, this paper aims to reveal problematic issues in mathematical modeling of transient modes of MFEC with a solid rotor and create a basis for further research in this direction.