19 January 2017 in IEEE Transactions on Robotics
Designing an actuator system for highly dynamic legged robots has been one of the grand challenges in robotics research. Conventional actuators for manufacturing applications have difficulty satisfying design requirements for high-speed locomotion, such as the need for high torque density and the ability to manage dynamic physical interactions. To address this challenge, this paper suggests a proprioceptive actuation paradigm that enables highly dynamic performance in legged machines. Proprioceptive actuation uses collocated force control at the joints to effectively control contact interactions at the feet under dynamic conditions. Modal analysis of a reduced leg model and dimensional analysis of DC motors address the main principles for implementation of this paradigm. In the realm of legged machines, this paradigm provides a unique combination of high torque density, high-bandwidth force control, and the ability to mitigate impacts through backdrivability. We introduce a new metric named the “impact mitigation factor” (IMF) to quantify backdrivability at impact, which enables design comparison across a wide class of robots. The MIT Cheetah leg is presented, and is shown to have an IMF that is comparable to other quadrupeds with series springs to handle impact. The design enables the Cheetah to control contact forces during dynamic bounding, with contact times down to 85 ms and peak forces over 450 N. The unique capabilities of the MIT Cheetah, achieving impact-robust force-controlled operation in high-speed three-dimensional running and jumping, suggest wider implementation of this holistic actuation approach.
16 October 2023 in IEEE Transactions on Robotics
In a world designed for legs, quadrupeds, bipeds, and humanoids have the opportunity to impact emerging robotics applications from logistics, to agriculture, to home assistance. The goal of this survey is to cover the recent progress toward these applications that have been driven by model-based optimization for the real-time generation and control of movement. The majority of the research community has converged on the idea of generating locomotion control laws by solving an optimal control problem (OCP) in either a model-based or data-driven manner. However, solving the most general of these problems online remains intractable due to complexities from intermittent unidirectional contacts with the environment, and from the many degrees of freedom of legged robots. This survey covers methods that have been pursued to make these OCPs computationally tractable, with a specific focus on how environmental contacts are treated, how the model can be simplified, and how these choices affect the numerical solution methods employed. The survey focuses on model-based optimization while paving its way for broader combination with learning-based formulations to accelerate progress in this growing field.
1 February 2017 in The International Journal of Robotics Research
This paper presents the design and implementation of a bounding controller for the MIT Cheetah 2 and its experimental results. The paper introduces the architecture of the controller along with the functional roles of its subcomponents. The application of impulse scaling provides feedforward force profiles that automatically adapt across a wide range of speeds. A discrete gait pattern stabilizer maintains the footfall sequence and timing. Continuous feedback is layered to manage balance during the stance phase. Stable hybrid limit cycles are exhibited in simulation using simplified models, and are further validated in untethered three-dimensional bounding experiments. Experiments are conducted both indoors and outdoors on various man-made and natural terrains. The control framework is shown to provide stable bounding in the hardware, at speeds of up to 6.4 m/s and with a minimum total cost of transport of 0.47. These results are unprecedented accomplishments in terms of efficiency and speed in untethered experimental quadruped machines.
20 July 2017 in IEEE Robotics and Automation Letters
JSJean-Jacques E. Slotine
With the increased application of model-based whole-body control in legged robots, there has been a resurgence of research interest into methods for accurate system identification. An important class of methods focuses on the inertialparameters of rigid-body systems. These parameters consist of the mass, first mass moment (related to center of mass location), and rotational inertia matrix of each link. The main contribution of this letter is to formulate physical-consistency constraints on these parameters as Linear Matrix Inequalities (LMIs). The use of these constraints in identification can accelerate convergence and increase robustness to noisy data. It is critically observed that the proposed LMIs are expressed in terms of the covariance of the mass distribution, rather than its rotational moments of inertia. With this perspective, connections to the classical problem of moments in mathematics are shown to yield new bounding-volume constraints on the mass distribution of each link. While previous work ensured physical plausibility or used convex optimization in identification, the LMIs here uniquely enable both advantages. Constraints are applied to identification of a leg for the MIT Cheetah 3 robot. Detailed properties of transmission components are identified alongside link inertias, with parameter optimization carried out to global optimality through semidefinite programming.
1 March 2016 in International Journal of Humanoid Robotics