Internet of things (IoT) integrate the technologies such as sensing, communication, networking and cloud computing in wide range monitoring zone. For applications of IoT, the most appropriate monitoring network is wireless sensor networks (WSN). It is most important to develop energy efficient cluster head (CH) selection scheme to increase the network lifetime of WSNs. It is most crucial to save the energy of these sensor nodes to avoid quick battery drain. In this work, a dynamic CH selection method (DCHSM) is proposed to extend the network lifetime of the systems developed for IoT applications. At first the concept of Voronoi diagram is utilized to divide the large scale monitoring area into small clusters in order to ensure maximum coverage and then the CH is selected in two stages. The first stage of the CH selection is based on perceived probability and the second stage is based on the survival time estimation. Results depicts that the new work performs better than existing algorithms with regard to energy saving and network lifetime for the IoT systems.
Low power sensors are emerging to up held the current edge technology. Sensor devices linked to each other via short ranged radios form wireless sensor networks (WSN). In recent development, WSNs are utilized for Internet of Things (IoT) applications like monitoring, automation and control, etc. The data collected is dumped on internet cloud so that easy access to data from remote place is possible. The most crucial feature of sensor device is energy saving as these are battery driven circuits. This work proposes the extension version of a distributed cluster computing technique to save battery energy and extend the WSN lifetime. The modified protocol inculcate cluster formation based on event occurrence, which gives improved results in terms of network lifetime compared to its conventional protocol. Simulation results also shows that proposed protocol is scalable thus can be used for IoT systems.