2 August 2012 in Gold Bulletin
The bonding mechanisms of gold, to give the desired strength of wire bonding, still require detailed investigation, including establishing adequate and reliable testing procedures. The current practices for analysing the mechanisms of wire bonding are inadequate and do not provide a comprehensive picture. This is because the focus of the tests is not clear, which causes variation in the results obtained, changing the conclusions about the responsible mechanism. Furthermore, as the size of Au wire bonds decreases, the mechanism responsible for thermosonic Au wire bonding may change. This paper provides a comprehensive analysis of the current and possible future methods for elaborating the bonding mechanism and strength of thermosonic Au wire bonds. We discuss the testing methods, their limitations and advantages, and suggest ways in which they can be improved.
1 January 2014 in Advances in Materials Science and Engineering
Al-Mg-Si (AA6061) Al alloy plates were joined by the method of gas metal arc welding using Al-5Mg (ER5356) filler metal and were subjected to the oxidation test in flowing air environment atfrom 8 to 40 hours and the weight gain was measured. The characteristic of oxide grown on welded zone surface was examined by SEM/EDS, XRD, and XPS. Oxide was observed to grow on the fused metal surface suggesting the possibility of modifying the oxide chemistry under high temperature environment. It was found that the oxidation behavior of fused metal affected by the nature of their oxide growth and morphology, was influenced by their welding process and the difference in the chemical composition.
31 July 2018 in Sains Malaysiana
1 August 2013 in Materials Science and Engineering: A
MHMuhammad Azmi Abdul Hamid
Muhammad Azmi Abdul Hamid
30 June 2019 in Sains Malaysiana
5 March 2013 in Journal of Electronic Materials