Heeje Han

Heeje Han

Auto-generated profile, based on publicly available information

Heeje Han

Department of Electrical Engineering, Kyungpook National University, 80, Daehak-ro, Buk-gu, Daegu 41566, Republic of Korea

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 November 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
HHHeeje Han
Heeje Han
SPSoonwoo Park
Soonwoo Park
HPHongwoo Park
Hongwoo Park
HKHongjoon Kim
Hongjoon Kim
By employing varactor diodes in a metasurface, the resonance frequency of a high-impedance surface (HIS) can be changed by a bias voltage. To modulate the frequency of the reflected wave from such surfaces, a phase variation of more than 360° is required. To overcome the phase variation limitation (<360°) in a conventional active metasurface, we fabricated a metasurface with two resonances and manipulated both poles simultaneously to achieve a phase variation exceeding 360° for smooth modulation of the reflection frequency. Because of this wide variation in the reflection phase, it is possible to modulate a broad range of frequencies between 2.75 and 3.25 GHz with up to 1-MHz variation in the modulation frequency. The best spurious-free dynamic range (SFDR) for this frequency range is 20.7 dBc at 3.25 GHz.

6 December 2019 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
SPSoonwoo Park
Soonwoo Park
HHHeeje Han
Heeje Han
CKChanwoo Kim
Chanwoo Kim
JBJaemin Bae
Jaemin Bae
YCYoungki Cho
Youngki Cho
HKHongjoon Kim
Hongjoon Kim
A band-selective power divider is demonstrated for the first time. By replacing lumped element right-handed (RH) and left-handed (LH) transmission lines (TL) in a conventional Wilkinson power divider, it is possible to achieve both power division and filtering simultaneously. By utilizing the positive phase propagation property of an RHTL, which works as a low-pass filter, and the negative phase propagation property of an LHTL, which works as a high-pass filter, the band-selective quarter-wave sections required to construct a Wilkinson power divider are implemented. The fabricated circuit shows an insertion loss in the range 1.7 dB–2.5 dB in the passband, with the circuit dimensions of merely 12 mm by 10 mm.

14 August 2023 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
HHHeeje Han
Heeje Han
HKHongjoon Kim
Hongjoon Kim
A flat phase difference across a broad bandwidth is achieved by appropriately combining the positive and negative phase propagation of right-handed (RH) and left-handed (LH) transmission lines (TLs), respectively. Employment of lumped elements provides easy realization of both TLs with the desired frequency passband, characteristic impedance, and phase propagation. The proposed quadrature power divider (QPD) was fabricated in a compact size by only using lumped elements instead of general TLs with a large area and a narrow bandwidth. The fabricated QPD maintains a flat phase difference of 90° ± 8.7° over a frequency range of 1.19–2.96 GHz while its circuit size is 0.036 . Owing to drastic size reduction of the QPD, the proposed balanced amplifier (BA) also could be realized with an extremely compact size of 0.044 and broad bandwidth unlike in other BAs reported in the literature and maintains a return loss of less than −10 dB at each port over the bandwidth of the QPD.

1 January 2025 in International Journal of RF and Microwave Computer-Aided Engineering
Verified
Journal Article
Open access
HHHeeje Han
Heeje Han
SPSoonwoo Park
Soonwoo Park
HKHongjoon Kim
Hongjoon Kim
This paper presents a design for a band‐pass filter (BPF) with a desired phase shift at the inclined frequency in the passband. This design is achieved by combining a right‐handed transmission line (RHTL), which exhibits positive phase propagation and works as a low‐pass filter (LPF), and a left‐handed transmission line (LHTL), which exhibits negative phase propagation and works as a high‐pass filter (HPF). The proposed BPF simultaneously realizes a desired frequency filtering and phase shifting by cascading proper unit cells of RHTL and LHTL. To verify our proposed idea, we designed four BPFs with similar passband frequencies but different phase delays at a certain frequency in the passband. In the actual experiment, phase delays of 0°, +90°, −90°, and 180° were used, and the phase deviations from the designed phase shift were less than 9.59° at 600 MHz for all four phase delays. The insertion losses were maintained below 1.31 dB. As the RHTL and LHTL were synthesized with lumped elements only, the circuit is compact and applicable to monolithic microwave integrated circuit design.

30 September 2021 in The Transactions of The Korean Institute of Electrical Engineers
Verified
Journal Article
Closed access
HHHeeje Han
Heeje Han
SPSoonwoo Park
Soonwoo Park
HKHongjoon Kim
Hongjoon Kim
By employing varactor diodes in a metasurface, the surface impedance can be changed by a bias voltage, as the resonant frequency altered. In order to convert the frequency of a reflected wave, 360° reflection phase variation is required. This study presents the related theory and demonstrates the frequency conversion through the experimental results. We achieved the reflection frequency conversion which is increased by 50 kHz more than the incident wave of 2.65 GHz, and its SFDR and conversion loss are 7.38 dBc and 5.62 dB, respectively. The proposed metasurface can contribute an efficient improvement in anti-RADAR system fields.