30 May 2025 in Science Advances
Anodic oxygen evolution reaction (OER) that involves a spin-dependent singlet-to-triplet oxygen changeover largely restrains the water electrolysis efficiency for hydrogen production. However, the modulation of spin state is still challengeable for most OER catalysts, and there remains a debate on deciphering the active spin state in OER. Here, we pioneered an asymmetric Fe-incorporated NiPS 3 tactic system to retune the metal localized spin for efficient OER electrocatalysis. It is unraveled that the synergistic effect of medium-spin Fe III site and P/S coordination can effectively boost OER activity and Cl resistance selectivity in alkaline/sea water. Resultantly, the Fe/NiPS 3 -based asymmetric electrodes exhibit low cell voltages of 1.50 volts/1.52 volts in alkaline/sea water at 10 milliamperes per square centimeter, together with a sustainable retention for 1000 hours. It also delivers the durable performance in anion exchange membrane water electrolyzers with a low operation voltage at 45°C. This research navigates the atomic localized spin state as the criterion in rationalizing efficient nonprecious alkaline/sea water oxidation electrocatalysts.
10 April 2025 in Nature Communications
High-entropy alloys (HEAs) are promising catalysts particularly adept for reactions involving multiple intermediates and requiring multifunctional active sites. However, conventional syntheses often result in either (kinetically) random-mixing HEA or (thermodynamically) phase-separated composites-both fail to fine-tune local structures and further optimizing their performances. Here we present finely tailoring the local ensembles in HEA catalysts through rational composition design and sequential pulsed annealing. Employing PdSnFeCoNi HEA as a model, pulsed annealing (e.g., 0.5 s heating at 1300 K for 30 cycles) leverages differences in enthalpic interactions and surface energies to control the formation of ultrafine PdSn clusters within the HEA matrix, yielding the heterostructured HEA/c-PdSn. Compared with random HEAs and commercial Pd/C, HEA/c-PdSn exhibits >5 − 10-fold higher mass activity and good stability (>90.6% retention after 2000 cycles) for ethanol oxidation. This enhancement arises from the synergy between active local ensembles and the multifunctional HEA matrix, which reduces overall limiting potential, mitigates sluggish C-C/C-H breaking, and enhances structural stabilization. Our findings provide a strategy for engineering heterostructured HEAs for broad catalytic applications.
16 April 2025 in Nature Communications
FeM (M = Se, Te) chalcogenides have been well studied as promising magnets and superconductors, yet their potential as electrocatalysts is often considered limited due to anion dissolution and oxidation during electrochemical reactions. Here, we show that by using two-dimensional (2D) FeTeSe nanosheets, these conventionally perceived limitations can be leveraged to enable the reaction-driven in-situ generation of anisotropic in-plane tensile and out-of-plane compressive strains during the alkaline low-concentration nitrate reduction reaction (NO3−RR). The reconstructed catalyst demonstrates enhanced performance, yielding ammonia with a near-unity Faradaic efficiency and a high yield rate of 42.14 ± 2.06 mg h−1 mgcat−1. A series of operando synchrotron-based X-ray measurements and ex-situ characterizations, alongside theoretical calculations, reveal that strain formation is ascribed to chalcogen vacancies created by partial Se/Te leaching, which facilitate the adsorption and dissociation of OH−/NO3− from the electrolyte, resulting in an O(H)-doped strained lattice. Combined electrochemical and computational investigations suggest that the superior catalytic performance arises from the synergistic contributions from the exposed strained Fe sites and surface hydroxyl groups. These findings highlight the potential of 2D transition metal chalcogenides for in-situ structural engineering during electrochemical reactions to enhance catalytic activity for NO3−RR and beyond.
4 April 2025 in Nature Communications
Heterogeneous single-atom catalysts (SACs) have gained significant attention for their maximized atom utilization and well-defined active sites, but they often struggle with multi-stage organic cross-coupling reactions due to limited coordination space and reactivity. Here, we report an "anchoring-borrowing" strategy combined facet engineering to develop artful single-atom catalysts (ASACs) through anchoring foreign single atoms onto specific facets of the non-innocent reducible carriers. ASACs exhibit adaptive coordination, effectively bypassing the oxidative-addition prerequisite for bivalent elevation at a single metal site in both homogenous and heterogeneous cross-couplings. For example, Pd1-CeO2(110) ASAC exhibits unparalleled activity in coupling with more accessible aryl chlorides, and challenging heterocycles, outperforming traditional catalysts with a remarkable turnover number of 45,327,037. Mechanistic studies reveal that ASACs leverage dynamic structural changes, with reducible carriers acting as electron reservoirs, significantly lowering reaction barriers. Furthermore, ASACs enable efficient synthesis of biologically significant compounds, drug intermediates, and active pharmaceutical ingredients (APIs) through a scalable high-speed circulated flow synthesis, underscoring great potential for sustainable fine chemical manufacturing.
5 August 2025 in ACS Nano
12 November 2021 in Chemical Communications
Two-dimensional bi-metallic NiFe nitrides (2D NiFe–N) are successfully synthesized in the designed ternary deep eutectic solvents under the guidance of DFT calculations. Taking advantage of the unique properties of large-size, ultrathin amorphous 2D structure and modulable electronic structure, the NiFe0.05–N exhibits extraordinary OER performance with relatively low overpotential of 238 mV at 10 mA cm−2 and durable stability.