The dynamic properties of vibration control systems pose unique requirements and challenges on the implementation of model predictive control (MPC) algorithms with stability and feasibility guarantees. This article presents a comprehensive experimental comparison of computation timing and damping performance for various MPC methods; analyzing their offline and online properties in active vibration control and their impact on practical implementability. Optimal and sub-optimal MPC algorithms providing guaranteed stability and constraint feasibility have been applied to the real-time active vibration attenuation of a lightly damped mechanical test structure. Based on the experiments presented in this paper, the standard and sequential quadratic programming-based, optimal and sub-optimal minimum time multi-parametric programming-based and the sub-optimal Newton–Raphson’s algorithm-based MPC methods demonstrate closely comparable vibration attenuation performance. The offline and online timing analysis indicates that the underlying difference between the investigated MPC algorithms lies mainly in practical implementability difficulties caused by inherent algorithm efficiency, rendering certain variants of MPC more suitable for vibration control than others.
This paper presents an efficient real-time implementation of embedded model predictive control, adopted in the context of active vibration control with the objective of minimizing the tip deflection of lightly damped cantilever beams. In particular, we focus on memory and time-efficient explicit solutions of the associated constrained optimal control problems that are easily implementable on low-end embedded hardware. To this end, we exploit the concept of convex lifting and show how it can be used to devise low-complexity, regionless piecewise affine controllers without any loss of optimality and performance. The efficiency of this constructive procedure is quantified via an extensive complexity analysis, evidenced by a successful practical deployment and optimal vibration control performance using a family of 32-bit ARM Cortex-M-based microcontroller platforms.
This paper presents an adaptive-predictive vibration control system using extended Kalman filtering for the joint estimation of system states and model parameters. A fixed-free cantilever beam equipped with piezoceramic actuators serves as a test platform to validate the proposed control strategy. Deflection readings taken at the end of the beam have been used to reconstruct the position and velocity information for a second-order state-space model. In addition to the states, the dynamic system has been augmented by the unknown model parameters: stiffness, damping constant, and a voltage/force conversion constant, characterizing the actuating effect of the piezoceramic transducers. The states and parameters of this augmented system have been estimated in real time, using the hybrid extended Kalman filter. The estimated model parameters have been applied to define the continuous state-space model of the vibrating system, which in turn is discretized for the predictive controller. The model predictive control algorithm generates state predictions and dual-mode quadratic cost prediction matrices based on the updated discrete state-space models. The resulting cost function is then minimized using quadratic programming to find the sequence of optimal but constrained control inputs. The proposed active vibration control system is implemented and evaluated experimentally to investigate the viability of the control method.
This article presents an open-source device illustrating the well-known magnetic levitation experiment. The uniqueness of this particular device lies in its exceptionally small dimensions, affordability and availability, which makes it a perfect design for take-home experiments for education but it can also serve as a referential design for testing various control algorithms in research. In addition, this paper provides a comprehensive hardware design for reproducibility along with the detailed derivation of the mathematical model, system identification and validation. Moreover, the introduced hardware comes with an easy-to-use open-source application programming interface in C/C++ for the Arduino IDE, Simulink and CircuitPython. REXYGEN, another environment similar to Simulink, had also been used to demonstrate the capabilities of the MagnetoShield.
This article presents a reference design for the well-known ball-on-beam laboratory experiment, where a spherical ball without direct actuation is only balanced by the inclination of a supporting structure, such as beam, rail or tube. The design introduced here is completely open-source and utilizes only a handful of off-the-shelf components and 3D printing; resulting in an exceptionally low hardware cost. Moreover, the resulting apparatus fits on a standard expansion module format, known as a Shield, which is compatible with a range of microcontroller prototyping boards from the Arduino ecosystem. This affordable, small, reproducible and open design is thus intended to aid control systems or mechatronics education via hands-on student experiments or even conducting research on a budget. In addition to the hardware design with downloadable project files, we also present an application programming interface and the results of a demonstration example here.