Beta gallium oxide (β-Ga2O3) shows significant promise in high-temperature, high-power, and sensing electronics applications. However, long-term stable metallization layers for Ohmic contacts at high temperatures present unique thermodynamic challenges. The current most common Ohmic contact design based on 20 nm of Ti has been repeatedly demonstrated to fail at even moderately elevated temperatures (300–400 °C) due to a combination of nonstoichiometric Ti/Ga2O3 interfacial reactions and kinetically favored Ti diffusion processes. Here, we demonstrate stable Ohmic contacts for Ga2O3 devices operating up to 500–600 °C using ultrathin Ti layers with a self-limiting interfacial reaction. The ultrathin Ti layer in the 5 nm Ti/100 nm Au contact stack is designed to fully oxidize while forming an Ohmic contact, thereby limiting both thermodynamic and kinetic instability. This novel contact design strategy results in an epitaxial conductive anatase titanium oxide interface layer that enables low-resistance Ohmic contacts that are stable both under long-term continuous operation (>500 h) at 600 °C in vacuum (≤10−4 Torr), as well as after repeated thermal cycling (15 times) between room temperature and 550 °C in flowing N2. This stable Ohmic contact design will accelerate the development of high-temperature devices by enabling research focus to shift toward rectifying interfaces and other interfacial layers.
6 May 2024 in Journal of Vacuum Science & Technology A
Nanometer-scale crystallographic structure and orientation of a NbTiN/AlN/NbTiN device stack grown via plasma-assisted molecular beam epitaxy on c-plane sapphire are reported. Structure, orientation, interface roughness, and thickness are investigated using correlative four-dimensional scanning transmission electron microscopy and atom probe tomography (APT). This work finds NbTiN that is rock salt structured and highly oriented toward ⟨111⟩ with rotations about that axis corresponding to step edges in the c-plane sapphire with a myriad of twin boundaries that exhibit nanoscale spacing. The wurtzite (0001) AlN film grown on (111) NbTiN exhibits nm-scale changes in the thickness resulting in pinhole shorts across the barrier junction. The NbTiN overlayer grown on AlN is polycrystalline, randomly oriented, and highly strained. APT was also used to determine local changes in chemistry within the superconductor and dielectric. Deviation from both intended cation:cation and cation:anion ratios are observed. The results from conventional and nanoscale metrology highlight the challenges of engineering nitride trilayer heterostructures in material systems with complicated and understudied phase space.
In quantum information applications, accurate spatial measurement of isotopes within quantum wells, point defects at superconductor interfaces, and single extrinsic dopant atoms are necessary to characterize structure-property relationships. Atomic Scale Analytical Tomography (ASAT) with subatomic precision and high efficiency is well suited to provide insight into these measurement challenges. One possible path towards ASAT involves correlative diffraction and spatial information from the scanning transmission electron microscope (STEM) and single isotope information from atom probe tomography (APT), referred to as STEM-centric ASAT [ 1]. In this method, TEM diffraction information is used to generate a crystal lattice the size and shape of the specimen volume evaporated during APT [ 2]. In this work, we extend that approach by using 4D-STEM data to determine the local crystal structure, orientation, and strain within smaller volumes of the APT specimen and take an automated approach to integrating the datasets to improve reproducibility. The 4D-STEM data are used to create a specimen function of the lattice points contained by the volume evaporated during the APT experiment with atom position resolution approaching 5 pm. Isotopic information about each lattice position is then applied using the mass spectral information collected during APT.
Emerging quantum materials as well as novel traditional electronic and photonic materials may enable a new generation of information science devices if they can be synthesized on suitable substrates. Additionally, material and device designs may benefit from tunable properties through engineered epitaxial strain for the manipulation of the electronic character. In this work, three series of III–V ternary alloys, GaInSb, AlInSb, and InAsSb, are grown via molecular beam epitaxy on GaAs (001) substrates to explore the flexibility of abrupt metamorphic epitaxial layers with tunable lattice parameters between 6.135 and 6.479 Å. Their deposition on both homomorphic GaAs and pseudomorphic AlAs buffers is also explored. The structures of these alloys are characterized via reflection high-energy electron diffraction, high-resolution x-ray diffraction, atomic force microscopy, and transmission electron microscopy to assess their suitability as stable buffer layers with wide variability of accessible lattice parameters.