Macao Institute of Materials Science and Engineering (MIMSE), Faculty of Innovation Engineering, Macau University of Science and Technology, Taipa, Macau SAR, China
Auto-generated profile, based on publicly available information
Jing‐De Chen
Macao Institute of Materials Science and Engineering (MIMSE), Faculty of Innovation Engineering, Macau University of Science and Technology, Taipa, Macau SAR, China
Organic photodetectors (OPDs) have attracted continuous attention due to their outstanding advantages, such as tunability of detecting wavelength, low‐cost manufacturing, compatibility with lightweight and flexible devices, as well as ease of processing. Enormous efforts on performance improvement and application of OPDs have been devoted in the past decades. In this Review, recent advances in device architectures and operation mechanisms of phototransistor, photoconductor, and photodiode based OPDs are reviewed with a focus on the strategies aiming at performance improvement. The application of OPDs in spectrally selective detection, wearable devices, and integrated optoelectronics are also discussed. Furthermore, some future prospects on the research challenges and new opportunities of OPDs are covered.
A novel acceptor–donor–acceptor (A–D–A) type electron acceptor 6TIC‐4F with terthieno[3,2‐b]thiophene (6T) as the core unit is rationally designed and synthesized, which exhibits an extraordinarily narrow bandgap (≈1.24 eV) and strong absorption between 650 and 1000 nm. X‐ray crystallographic analysis reveals that it has unique intermolecular π–π stacking. The solar cells based on the as‐cast poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione))]) (PBDB‐T):6TIC‐4F binary blends exhibit an excellent power conversion efficiency (PCE) of 11.14% with a high JSC of 23.00 mA cm−2, and a high fill factor of 0.67, which represents one of the best PCE values for low bandgap (Eg < 1.3 eV)–based organic solar cells.
A terthieno[3,2‐b]thiophene (6T) based fused‐ring low bandgap electron acceptor, 6TIC, is designed and synthesized for highly efficient nonfullerene solar cells. The chemical, optical, and physical properties, device characteristics, and film morphology of 6TIC are intensively studied. 6TIC shows a narrow bandgap with band edge reaching 905 nm due to the electron‐rich π‐conjugated 6T core and reduced resonance stabilization energy. The rigid, π‐conjugated 6T also offers lower reorganization energy to facilitate very low VOC loss in the 6TIC system. The analysis of film morphology shows that PTB7‐Th and 6TIC can form crystalline domains and a bicontinuous network. These domains are enlarged when thermal annealing is applied. Consequently, the device based on PTB7‐Th:6TIC exhibits a high power conversion efficiency (PCE) of 11.07% with a high JSC > 20 mA cm−2 and a high VOC of 0.83 V with a relatively low VOC loss (≈0.55 V). Moreover, a semitransparent solar cell based on PTB7‐Th:6TIC exhibits a relatively high PCE (7.62%). The device can have combined high PCE and high JSC is quite rare for organic solar cells.
Inorganic mixed‐halide CsPbX3‐based perovskite solar cells (PeSCs) are emerging as one of the most promising types of PeSCs on account of their thermostability compared to organic–inorganic hybrid counterparts. However, dissatisfactory device performance and high processing temperature impede their development for viable applications. Herein, a facile route is presented for tuning the energy levels and electrical properties of sol–gel‐derived ZnO electron transport material (ETM) via the doping of a classical alkali metal carbonate Cs2CO3. Compared to bare ZnO, Cs2CO3‐doped ZnO possesses more favorable interface energetics in contact with the CsPbI2Br perovskite layer, which can reduce the ohmic loss to a negligible level. The optimized PeSCs achieve an improved open‐circuit voltage of 1.28 V, together with an increase in fill factor and short‐circuit current. The optimized power conversion efficiencies of 16.42% and 14.82% are realized on rigid glass substrate and flexible plastic substrate, respectively. A high thermostability can be simultaneously obtained via defect passivation at the Cs2CO3‐doped ZnO/CsPbI2Br interface, and 81% of the initial efficiency is retained after aging for 200 h at 85 °C.
Highly efficient bifacial organic solar cells (OSCs) have not been reported due to limited thickness of the active layer in conventional configurations, not allowing for efficient harvesting of front sunlight and albedo light. Here, bifacial OSCs are reported with efficiency higher than the monofacial counterparts. The incorporation of pyramid-based asymmetrical optical transmission (AOT) array to a transparent silver electrode suppresses the escaping of front sunlight without sacrificing the harvesting of albedo light. Parasitic absorption induced by the excitation of surface plasmons in an AOT electrode is further reduced by doping organic emitter in electron transport layer and capping high dielectric constant film to silver. The rear electrode achieves a front transmittance of 7% and a rear transmission of 86%. At a conventional albedo of 0.2, the synergistic effect of AOT and minimized optical loss endow the bifacial OSCs with power conversion efficiency of 20.4%. This work paves the way for the utilization of albedo light in OSCs.