The cost of ionic liquids (ILs) is a barrier to utilization in cellulosic biorefinery pretreatment. Our low-cost [HSO4]− ILs are nearly as efficient as standard [OAc] options.
Ionic liquids (ILs) are known to be very effective at deconstructing biomass, but, they are typically 5-20 times more expensive than molecular solvents; this is a major impediment to the utilisation of ILs in biorefinery applications. In view of this, this paper is the first to report a preliminary study on the use of inexpensive and bifunctional triethylammonium hydrogen sulfate ionic liquid, [N2220][HSO4] IL, in deconstructing two Malaysian agro-wastes, oil palm empty fruit bunches (OPEFB) and coconut husk. The [N2220][HSO4] IL was synthesised via simple acid-base neutralisation route between two inexpensive precursors: sulfuric acid, H2SO4, and triethylamine, N222. The results of deconstruction of OPEFB and coconut husk under the applied conditions, IL/H2O (80/20 wt/wt) at 120 °C for 2 h, proved that the IL provided bifunctional action as: a Brønsted acid catalyst that hydrolysed chemical bonds linking carbohydrate-rich-material (cellulose and hemicellulose) and lignin fractions, and; a delignification agent that dissolved lignin, separating the biopolymer from the carbohydrate-rich-material. The outcomes of this study indicate that the deconstruction of Malaysian agro-wastes for isolating valuable biopolymers can be performed in a more economical and effective way using the [N2220][HSO4] IL.
This review does not attempt to be comprehensive, but it briefly introduces triethylammonium hydrogen sulfate ionic liquid ([N2220][HSO4] IL), which has been regarded as a low-cost solvent. It provides guidance regarding the synthesis procedures of the IL and several routine assessments for gaining insight into the properties of the IL. The review also selects examples of applications wherein the IL has been applied. It is hoped that the review will stimulate more research utilising the [N2220][HSO4] IL across various disciplines of science and engineering.
This study investigates the effects of temperature and period on the pretreatment of OPEFB using the low-cost N,N,N-dimethylbutylammonium hydrogen sulfate ionic liquid ([DMBA][HSO4] IL) with 20 wt% of water. The results demonstrate that higher pretreatment temperatures (120, 150, and 170 °C) and longer periods (0.5, 1, and 2 h) enhanced lignin recovery, resulting in increased purity of the recovered pulp and subsequently enhanced glucose released during enzymatic hydrolysis. However, at 170 °C, prolonging the period led to cellulose degradation and the formation of pseudo-lignin deposited on the pulps, resulting in a decreasing-trend in glucose released. Finally, the analysis of extracted lignin reveals that increasing pretreatment severity intensified lignin depolymerisation and condensation, leading to a decrease in number average molecular weight (Mn), weight average molecular weight (Mw) and polydispersity index (Đ) values.
1 May 2020 in Journal of Physics: Conference Series
In this study, polycondensation of 88wt% lactic acid (LA) was performed by irradiating LA with microwave at different powers (P=250, 440, 715 and 900W) for 5 min, in the absence of a catalyst. The recovered products were analysed by attenuated total reflectance-infrared (ATR-IR) and thermogravimetric analysis (TGA). It was found that raising microwave power resulted in a significant increase in mass loss, even much higher than the water content of the fresh LA (12wt%). Such an observation was likely to be caused by two occurrences. The first is associated with the evaporation of 12wt% of water molecules in the fresh LA that escalated upon increasing microwave power. This is supported by ATR-IR analysis illustrating a decreasing trend in the intensity of O-H stretching band. The second is linked to the intensified polycondensation of LA to polylactic acid (PLA) when elevating microwave power, forming more ester bonds and consequently eliminating more water molecules. The increased formation ester bonds was evidenced by the shift in Tonset values towards higher temperatures, as exhibited by TGA profiles. As overall, the outcomes of this study could lead to a cost effective and energy saving production of biodegradable plastics, substituting the time-consuming conventional heating.
This study investigated the exchange affinity of Fe 3+ , Cu 2+ , and Zn 2+ cations in sulfuric acid-purified montmorillonite (S-MMT) to enhance Lewis acid sites and subsequently improve the catalytic conversion of glucose to lactic acid.