1 January 2019 in Proceedings of the Combustion Institute
1 July 2019 in Combustion and Flame
31 October 2018 in Combustion Science and Technology
Combustion-generated nanoparticles cause detrimental effects to not only health and environment but also combustion efficiency. A detailed kinetic mechanism employing a discrete sectional model is validated using experimental data obtained in laminar counterflow diffusion flames of ethylene/oxygen/nitrogen. Two configurations, named Soot formation (SF) and soot formation/oxidation (SFO) flames, are modeled using one-dimensional simulations. Radiative heat losses reduce the maximum flame temperature in the range of 20–60 K and therefore reduce soot volume fraction by ~ 10%. The model predictions accounting for the radiation effects are quite satisfactory. The model can reproduce the qualitative trends of soot volume fraction peaks that are slightly shifted toward the oxidizer zone with the increased oxygen content. In SF flames, the model predicts the maximum soot volume fraction quite well with the largest discrepancy of two folds. The particle stagnation locations can be reproduced by the model, although they are slightly shifted toward the oxidizer nozzle by ~ 0.4 mm. In SFO flames, the most considerable discrepancy is observed at the least sooting flame (xF,o = 0.23) in which the model over-predicts the maximum soot volume fraction by a factor of two. The effect of soot oxidation is important. The model shows that neglecting oxidation of soot significantly increases soot volume fraction in SFO flames by two folds while SF flames are only marginally affected. Also, ignoring soot oxidation leads to the presence of soot particles in the oxidizer zone where they are not observed experimentally. OH is the most effective oxidizer because the sooting zone is located inside the flame region. The effect of thermophoresis is also investigated. It strongly influences SFO flames due to the high temperature gradient. The model accounting particle diffusivities from Stokes–Cunningham correlation can better characterize the distinct particle stagnation plane of SF flames due to their low diffusion coefficients.
16 July 2025 in Chemical Engineering Journal
9 September 2019 in SAE International Journal of Advances and Current Practices in Mobility
The Computational Chemistry Consortium (C3) is dedicated to leading the advancement of combustion and emissions modeling. The C3 cluster combines the expertise of different groups involved in combustion research aiming to refine existing chemistry models and to develop more efficient tools for the generation of surrogate and multi-fuel mechanisms, and suitable mechanisms for CFD applications. In addition to the development of more accurate kinetic models for different components of interest in real fuel surrogates and for pollutants formation (NOx, PAH, soot), the core activity of C3 is to develop a tool capable of merging high-fidelity kinetics from different partners, resulting in a high-fidelity model for a specific application. A core mechanism forms the basis of a gasoline surrogate model containing larger components including n-heptane, iso-octane, n-dodecane, toluene and other larger hydrocarbons. Moreover, poly-aromatic hydrocarbon modules are developed in addition to a NOx formation module. This work describes the challenges and approach for merging the different modules, discussing and analyzing the results from the model, obtained by comparing with experimental targets typically used for model validation (i.e. ignition delay times, laminar flame speed, species measurements in ideal reactors and flames). The case study here focuses on a gasoline TPRF surrogate, obtained by merging the kinetic modules of the disparate chemistry including hydrocarbon (alkene, alkane, aromatic and PAH species) and NOx chemistry. In addition, this work also describes the effort towards using these mechanisms for practical CFD simulations.