A numerical method has been used to analyze the flow field related to a NACA 0015 airfoil with and without a flap and assess the influence of the flap height and angle on the surface pressure coefficient, lift coefficient, and drag coefficient. The numerical results demonstrate that the flap can effectively improve the lift coefficient of the airfoil; however, at small attack angles, its influence is significantly reduced. When the angle of attack exceeds the critical stall angle and the flap height is 1.5% of the chord length, the influence of the flap becomes very evident. As the flap height increases, the starting point of the separation vortex gradually moves forward and generates a larger wake vortex. Optimal aerodynamic characteristics are obtained for 1.5% (of the chord length) flap height and a 45° flap angle; in this case, the separation vortex is effectively reduced.
In order to study the influence of double forked intelligent blade tip structure on natural frequency and vibration frequency of wind turbine at different yaw angles, numerical simulation of wind turbine with different blade tip structure was carried out by using big data technology and ANSYS software. The numerical results show that: under different yaw angles and the same wind turbine speed, the double forked blade tip structure can slightly reduce the first and second order mode, which are less than 1Hz. Under different wind turbine speeds and the same yaw angle, the double forked blade tip can significantly improve the vibration frequency, with the first order vibration frequency dropping up to 11.96% and the second order vibration frequency dropping up to 6.8%. It can be seen that the results provide experimental basis for vibration characteristics of wind turbine under yaw condition.