1 July 2002 in Colloids and Surfaces A: Physicochemical and Engineering Aspects
30 March 1998 in Physical Review Letters
Film rupture as the initial stage of dewetting is investigated for a volatile, spin-coated nonwetting film. During structure formation in the liquid film the film thickness is continuously reduced via evaporation. The dynamical character of the experiment allows the study of hole formation caused by distinct rupture mechanisms occurring at different film thicknesses. Both heterogeneous nucleation for thick films as well as spinodal dewetting for film thickness below 10 nm have been observed. The balance between both processes can be shifted by controlling the ambient humidity. The structures resulting from film rupture are quantified with respect to their different geometrical properties. For the first time we find that spinodal dewetting is caused by destabilizing polar interactions.
1 January 2014 in Communications in Computational Physics
Numerical Bifurcation Methods and their Application to Fluid Dynamics: Analysis beyond Simulation - Volume 15 Issue 1 - Henk A. Dijkstra, Fred W. Wubs, Andrew K. Cliffe, Eusebius Doedel, Ioana F. Dragomirescu, Bruno Eckhardt, Alexander Yu. Gelfgat, Andrew L. Hazel, Valerio Lucarini, Andy G. Salinger, Erik T. Phipps, Juan Sanchez-Umbria, Henk Schuttelaars, Laurette S. Tuckerman, Uwe Thiele
18 June 2001 in Physical Review Letters
Unstable thin liquid films on solid substrates dewet by hole nucleation on defects or by a linear surface instability (spinodal dewetting). A system with destabilizing short-range and stabilizing long-range molecular interactions is investigated. We show that, for a subrange within the linearly unstable film thickness range, nucleation determines the final structure, whereas spinodal dewetting is of negligible influence. The results are also applicable to the spinodal decomposition of binary mixtures.
8 June 2005 in The Journal of Chemical Physics
We consider a thin film consisting of two layers of immiscible liquids on a solid horizontal (heated) substrate. Both the free liquid–liquid and the liquid–gas interface of such a bilayer liquid film may be unstable due to effective molecular interactions relevant for ultrathin layers below 100-nm thickness, or due to temperature-gradient-caused Marangoni flows in the heated case. Using a long-wave approximation, we derive coupled evolution equations for the interface profiles for the general nonisothermal situation allowing for slip at the substrate. Linear and nonlinear analyses of the short- and long-time film evolution are performed for isothermal ultrathin layers, taking into account destabilizing long-range and stabilizing short-range molecular interactions. It is shown that the initial instability can be of a varicose, zigzag, or mixed type. However, in the nonlinear stage of the evolution the mode type, and therefore the pattern morphology, can change via switching between two different branches of stationary solutions or via coarsening along a single branch.
1 July 2003 in The European Physical Journal E