Attenuation processes of chlorinated ethenes in complex near-stream systems result in site-specific outcomes of great importance for risk assessment of contaminated sites. Additional interdisciplinary and comprehensive field research is required to enhance process understanding in these systems. In this study, several methods were combined in a multi-scale interdisciplinary in-situ approach to assess and quantify the near-stream attenuation of a chlorinated ethene plume, mainly consisting of cis-dichloroethene (cis-DCE) and vinyl chloride (VC), discharging to a lowland stream (Grindsted stream, Denmark) over a monitoring period of seven years. The approach included: hydrogeological characterisation, reach scale contaminant mass balance analysis, quantification of contaminant mass discharge, streambed fluxes of chlorinated ethenes quantified using Sediment Bed Passive Flux Meters (SBPFMs), assessment of redox conditions, temporal assessment of contaminant concentrations, microbial analysis, and compound-specific isotope analysis (CSIA). This study site exhibits a special attenuation behaviour not commonly encountered in field studies: the conversion from an initially limited degradation case (2012-16), despite seemingly optimal conditions, to one presenting notable levels of degradation (2019). Hence, this study site provides a new piece to the puzzle, as sites with different attenuation behaviours are required in order to acquire the full picture of the role groundwater-surface water interfaces have in risk mitigation. In spite of the increased degradation in the near-stream plume core, the contaminant attenuation was still incomplete in the discharging plume. A conceptualization of flow, transport and processes clarified that hydrogeology was the main control on the natural attenuation, as short residence times of 0.5-37 days restricted the time in which dechlorination could occur. This study reveals the importance of: taking an integrated approach to understand the influence of all attenuation processes in groundwater - surface water interactions; considering the scale and domain of interest when determining the main processes; and monitoring sufficiently both spatially and temporally to cover the transient conditions.
This dataset describes the outcome of a laboratory trichloroethene (TCE) treatability experiment with liquid activated carbon and bioamendments. The treatability experiment included unamended microcosms, bioamended microcosms with a Dehalococcoides containing culture and electron donor, and bioamended microcosms including liquid activated carbon (PlumeStop®). Data were collected frequently over an 85-day experimental period. Data were collected for the following parameters: redox sensitive species, chlorinated ethenes, non-chlorinated end-products, electron donors, compound specific isotopes, specific bacteria and functional genes. The reductive dechlorination of TCE could be described by a carbon isotope enrichment factor (εC) of -7.1 ‰. In the amended systems, the degradation rates for the TCE degradation were 0.08–0.13 d−1 and 0.05–0.09 d−1 determined by concentrations and isotope fractionation, respectively. Dechlorination of cis-DCE was limited. This dataset assisted in identifying the impact of different bioamendments and activated carbon on biodegradation of chlorinated ethenes. The dataset is useful in optimising design and setup for future laboratory and field investigations. This study provides novel information on the effect of low dose liquid activated carbon on chlorinated ethenes degradation by applying isotopic and microbial techniques, and by linking the outcome to a field case study. The data presented in this article are related to the research article “Assessment of chlorinated ethenes degradation after field scale injection of activated carbon and bioamendments: Application of isotopic and microbial analyses” (Ottosen et al., 2021).