11 June 2024 in Nature Communications
Seasonal storage of solar thermal energy through supercooled phase change materials (PCM) offers a promising solution for decarbonizing space and water heating in winter. Despite the high energy density and adaptability, natural PCMs often lack the necessary supercooling for stable, long-term storage. Leveraging erythritol, a sustainable mid-temperature PCM with high latent heat, we introduce a straightforward method to stabilize its supercooling by incorporating carrageenan (CG), a bio-derived food thickener. By improving the solid-liquid interfacial energy with the addition of CG the latent heat of erythritol can be effectively locked at a very low temperature. We show that the composite PCM can sustain an ultrastable supercooled state below −30 °C, which guarantees no accidental loss of the latent heat in severe cold regions on Earth. We further demonstrate that the common ultrasonication method can be used as the key to unlocking the latent heat stored in the CG-thickened erythritol, showing its great potential to serve as a high-performance, eco-friendly PCM for long-term seasonal solar energy storage.
30 May 2024 in International Journal of Heat and Mass Transfer
15 December 2023 in International Journal of Heat and Mass Transfer
20 May 2025 in Nature Communications
The fundamental interactions and the as-derived microstructures among electrolyte components play a pivotal role in determining the bulk and interfacial properties of the electrolytes. However, the complex structure-property relationships remain elusive, leading to uncontrollable physicochemical characteristics of electrolytes and unsatisfied battery performance. Herein, we propose two interaction motif descriptors to quantify ion-solvent interactions spanning electrostatic to dispersion regimes. These descriptors are highly relevant to salt dissolution, phase miscibility, and electrode-electrolyte interface chemistries. Guided by the principle of minimizing ion-solvent and solvent-solvent interactions while ensuring sufficient salt dissociation, a representative electrolyte, i.e., lithium bis(fluorosulfonyl)imide dissolved in trimethyl methoxysilane and 1,3,5-trifluorobenzene with a molar ratio of 1:2.5:3.0, is designed, which achieves ~99.7% (±0.2%) Li plating/stripping Coulombic efficiency and endows 4.5 V Li||LiCoO2 with 90% capacity retention after 600 cycles at 0.2 C/0.5 C charge/discharge rate. Notably, Cu||LiNi0.5Co0.2Mn0.3O2 pouch cells with this electrolyte sustain over 100 stable cycles. By establishing quantitative relationships between interaction motifs and electrolyte functionalities, this work provides a universal framework for rational electrolyte design, paving the way for highly reversible lithium metal batteries.
1 April 2025 in Journal of the Electrochemical Society
A comprehensive understanding of thermal transport properties at the material level for Lithium-ion batteries (LIBs) is often overlooked, despite being crucial for accurately reconstructing thermal behavior in macroscopic simulations for LIBs. To address this gap, a nitrogen-protected testing method integrated with an electrochemical cycling platform is first developed to measure the intrinsic thermal conductivity (k) of the electrodes and separator in LIBs, as well as the thermal contact resistance (R c) between them. The effects of the state of charge (SOC) and the charging rate (C-rate) on both k and R c are systematically evaluated, and the constituent of internal thermal resistance within the unit battery is clarified in detail. Results reveal that the k of the cathode increases monotonically with SOC, while the k of the anode exhibits a non-monotonic relationship whose trend depends on the C-rate. Notably, the R c between electrodes and separator, which constitutes the nonnegligible component of total thermal resistance, is marginally affected by SOC but increases significantly with higher C-rate. Additional experiments examining the effects of the testing environment underscore the necessity of nitrogen protection for accurate measurements of thermal transport properties. These findings provide valuable insights for improving thermal management strategies of LIBs in real-world applications.