Key Laboratory of Advanced Technologies of Materials (Ministry of Education) School of Materials Science and Engineering Southwest Jiaotong University Chengdu China
Auto-generated profile, based on publicly available information
Yanan Liu
Key Laboratory of Advanced Technologies of Materials (Ministry of Education) School of Materials Science and Engineering Southwest Jiaotong University Chengdu China
In this letter, we report a significant finding of the bias voltage-modulated lateral photovoltaic effect in a-Si:H/c-Si p-i-n structure under two different methods. The lateral photovoltaic effect was improved greatly when an external bias voltage was applied, with position sensitivity linearly dependent on the laser power. For method 1, although the position sensitivity is as high as 643.2 mV/mm, the linearity is strongly dependent on the value of bias voltage. However, understanding the nonlinear behavior of method 1, we ingeniously prepared a pair of symmetrical ground electrodes as method 2. It was found that the nonlinearity, which is as good as that without bias voltage, was nearly independent of the value of bias voltage again. Moreover, the largest position sensitivity of 238.1 mV/mm is still much larger than that without bias voltage.
Beam-wave interaction system of a Ka-Band traveling wave tube (TWT) based on carbon nanotube (CNT) cold cathode is theoretically researched in this paper. Based on the electron beam parameters of a truncated-cone carbon nanotube cold-cathode electron gun, a high-frequency system for coupled-cavity TWT is designed. Simulation results show that the maximum output power of the TWT can reach 313 W at 33.5 GHz with an input power of 500mW, corresponding to the maximum gain of 28 dB, when the electron beam voltage and current are 28 kV and 300 mA. The 3dB bandwidth of the TWT is about 0.6 GHz.