14 November 2022 in IEEE Photonics Journal
For the fronthaul link in the fifth-generation (5G) wireless networks, optical fiber is one of the most widely used medium, owing to its large bandwidth and low transmission loss. However, in some scenarios, especially the dense urban areas, the installation of fiber optic cables is costly and difficult to establish. Alternatively, the free space optical (FSO) link can be installed easily and spans complex terrain. In this context, we propose and experimentally demonstrate a hybrid FSO/Wireless transmission system based on bandpass delta-sigma modulator and real-time coherent transponder. Advantage of the proposed technique is twofold. Firstly, coherent detection is applied to improve the system sensitivity compared to conventional direct detection. Secondly, delta-sigma modulation (DSM) is utilized to greatly simplify the wireless transmitters and to enhance the bandwidth flexibility. Over a 50-m FSO and 1-m wireless link, a 64-QAM wireless signal at 1 GHz with 500 MHz bandwidth is successfully transmitted. With 16 wavelength division multiplexing channels, the total throughput of the system is up to 24 Gb/s. Meanwhile, the error vector magnitude (EVM) of all channels is around 2.68% and 6.51%, which are demonstrated after FSO and FSO/Wireless transmission, respectively. The results meet the requirement of the third-generation partnership project release 15 with EVM value of 8% for 64-QAM. Moreover, sensitivity of the real-time coherent receiver is lower than −48 dBm under the 7% forward error correction limit with bit error rate of 3.8e-3.
13 November 2019 in IEEE Photonics Journal
Direct detection (DD) is one of the most attractive solutions for short and medium reach optical fiber transmission in comprehensive consideration of digital signal processing (DSP), power consumption, and cost. Various single side band (SSB) DD techniques have been widely investigated to detect and process the complex signal. In this paper, we propose a novel approach which uses only high-speed digital input/outputs (IO) to generate both quadrature phase shift keying (QPSK) signal and virtual carrier signal. A transmission of 4×32 Gb/s QPSK signal over 1200-km standard single mode fiber (SSMF) in block-wise manner has been successfully demonstrated. Only a single polarization in-phase-and-quadrature (IQ) modulator and one single photodiode (PD) is used for each channel. Compared with conventional DSP of coherent detection, the DSP in the proposed scheme is also simplified that only fixed frequency compensation is required without additional phase noise elimination. The overall system complexity has been greatly reduced.
23 October 2023 in IEEE Photonics Journal
In free space optical (FSO) communication, acquisition, tracking and pointing (ATP) is the key technology to maintain a high-quality FSO link. Specifically, the detection of pointing angle deviation greatly affects the performance of ATP, especially under weak receiving power. However, the separated beacon laser beam commonly used in ATP will increase the structural complexity of the terminal such as the size, weight, and power. It is unwanted in some limited applications such as satellite. To improve the pointing accuracy with weak signal in beaconless FSO communication, we propose a delta-sigma enabled beaconless cross-correlation (CCR) method with four-quadrant detectors. In the proposed method, a low-frequency sine analog signal for CCR calculation is modulated into a 1-bit digital signal by delta-sigma modulation and then inserted into the communication data as a training sequence. The root means square error (RMSE) of the pointing angle deviation measurement is 14.17 μrad with the incident optical power of -40 dBm. Compared with the direct intensity method, of which RMSE is 67.61 μrad, the proposed method can effectively improve the pointing accuracy with weak power without a beacon laser in FSO communication.
21 August 2024 in Optics Express
Free space optical communication (FSOC) technology has been developed rapidly and practically applied in many scenarios such as satellite-related ones, in unmanned aerial vehicles, for underwater use, etc. In certain applications, it is very important to obtain the high-precision position and distance information. The laser ranging technology is one of the main ways to realize it. Moreover, it would be more interesting to accomplish the laser ranging integrated with the FSOC, which can effectively control the size, weight, and power of the FSOC terminals. However, in existing integrated laser communication and ranging solutions, the ranging accuracy is in the millimeter-level. To further improve the accuracy of laser ranging and communication rate in the integrated architecture, we propose a harmonic phase ranging method combined with delta-sigma modulation (DSM) based on a 10 Gb/s coherent FSOC. Through the DSM technology, a harmonic is converted into a digital signal which can be simply combined with the communication data and transmitted together in the FSO link. The laser ranging can thus be effectively combined with FSOC to realize an integrated architecture. Finally, the root means square error of the laser ranging are improved to ∼0.303 mm. Compared with the existing solutions, our proposed scheme shows both advantages of higher-precision ranging and higher communication rate.
13 September 2024 in Optics Letters
The model-based method can measure phase aberration without special wavefront detectors. However, the influence of non-uniform beam intensity distribution was not considered, leading to non-negligible system errors. Moreover, no experiments were employed to verify its capability and practicability in atmospheric turbulence. This paper proposes the aberrated pupil method, which can enhance the accuracy of phase recovery by introducing an aberrated pupil function into the traditional model-based method. The effectiveness of the model-based phase measurement and compensation method was experimentally investigated and verified in the application of free-space optical communication. Compared with the traditional model-based method, the aberrated pupil method can reduce the coupling power loss caused by turbulence from 2.59 to 0.87 dB, resulting in a reduction of 1.72 dB. With coherent communication experiments, the model-based phase recovery method significantly improved the communication power budget by about 13.5 dB. The proposed method can measure and compensate for the phase aberration to significantly improve the communication quality of free-space optical communication.