24 July 2020 in Soft Matter
Origami-inspired design of Gaussian morphing fabrics structures. Superimposed flat and inextensible fabric sheets are heat-sealed along a specific pattern of lines. Upon inflation, this network of tubular cavities deploys into a large, stiff and light shell, with a programmed shape.
7 August 2019 in Proceedings of the National Academy of Sciences
Significance: Inflatable structures are flat and foldable when empty and both lightweight and stiff when pressurized and deployed. They are easy to manufacture by fusing 2 inextensible sheets together along a defined pattern of lines. However, the prediction of their deployed shape remains a mathematical challenge, which results from the coupling of geometrical constraints and the strongly nonlinear and asymmetric mechanical properties of their composing material: thin sheets are very stiff on extensional loads, while they easily shrink by buckling or wrinkling when compressed. We discuss the outline shape, local cross-section, and state of stress of any curvilinear open path. We provide a reverse model to design any desired curved 2-dimensional shape from initially flat tubes.
14 October 2021 in Physical Review Letters
We show that ribbed elastic strips under tension present large spontaneous curvature and may close into tubes. In this single material architectured system, transverse bending results from a bilayer effect induced by Poisson contraction as the textured ribbon is stretched. Surprisingly, the induced curvature may reverse if ribs of different orientations are considered. Slender ribbed structures may also undergo a nontrivial buckling transition. We use analytical calculations to describe the evolution of the morphology of the ribbon and the transitions between the different experimental regimes as a function of material properties, geometrical parameters, and stretching strain. This scale-independent phenomenon may help the manufacturing of tubular textured structures or easily controllable grippers at small scale.
19 October 2020 in Advanced Materials
1 October 2020 in Journal of the Mechanics and Physics of Solids
27 May 2025 in Nature Communications
Passive and effective fluid capture and transport at small scale is crucial for industrial and medical applications, especially for the realisation of point-of-care tests. Performing these tests involves several steps, including capturing biological fluid, aliquoting, reacting with reagents, and reading the results. Ideally, these tests must be fast and offer a large surface-to-volume ratio to achieve rapid and precise diagnostics with a reduced amount of fluid. Such constraints are often contradictory as a high surface-to-volume ratio implies a high hydraulic resistance and hence a decrease in the flow rate. Inspired by the feeding mechanism of hummingbirds, we propose a frugal fluid capture device that takes advantage of elastocapillary deformations to enable concomitant fast liquid transport, aliquoting, and high confinement in the deformed state. The hierarchical design of the device – that consists in vertical grooves stacked on an elastic sheet – enables a two-step sequential fluid capture. Each unit groove mimics the hummingbird’s tongue and closes due to capillary forces when a wetting liquid penetrates, yielding the closure of the whole device in a tubular shape, in the core of which additional liquid is captured. Combining elasticity, capillarity, and viscous flow, we rationalise the fluid-structure interaction at play both when liquid is scarce and abundant. By functionalising the surface of the grooves, such a passive device can concomitantly achieve all the steps of point-of-care tests, opening the way for the design of optimal devices for fluid capture and transport in microfluidics.