Hidekazu Mimura

Hidekazu Mimura

Auto-generated profile, based on publicly available information

Hidekazu Mimura

The University of Tokyo

Research Focus & Metrics

Academic Career Length

26Years (2001-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 April 2014 in Nature Communications
Verified
Journal Article
Open access
PDF file
HMHidekazu Mimura
Hidekazu Mimura
HYHirokatsu Yumoto
Hirokatsu Yumoto
SMSatoshi Matsuyama
Satoshi Matsuyama
TKTakahisa Koyama
Takahisa Koyama
KTKensuke Tono
Kensuke Tono
KYKazuto Yamauchi
Kazuto Yamauchi
Intense X-ray fields produced with hard X-ray free-electron laser (XFEL) have made possible the study of nonlinear X-ray phenomena. However, the observable phenomena are still limited by the power density. Here, we present a two-stage focusing system consisting of ultra-precise mirrors, which can generate an extremely intense X-ray field. The XFEL beam, enlarged with upstream optics, is focused with downstream optics that have high numerical aperture. A grating interferometer is used to monitor the wavefront to achieve optimum focusing. Finally, we generate an extremely small spot of 30 × 55 nm with an extraordinary power density of over 1 × 1020 W cm−2 using 9.9 keV XFEL light. The achieved power density provides novel opportunities to elucidate unexplored nonlinear phenomena in the X-ray region, which will advance development on quantum X-ray optics, astronomical physics and high-energy density science.

1 September 2018 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
HMHidekazu Mimura
Hidekazu Mimura
YTYoshinori Takei
Yoshinori Takei
TKTakehiro Kume
Takehiro Kume
YTYoko Takeo
Yoko Takeo
HMHiroto Motoyama
Hiroto Motoyama
HOHaruhiko Ohashi
Haruhiko Ohashi
In X-ray focusing, grazing incidence mirrors offer advantages of no chromatic aberration and high focusing efficiency. Although nanofocusing mirrors have been developed for the hard X-ray region, there is no mirror with nanofocusing performance in the soft X-ray region. Designing a system with the ability to focus to a beam size smaller than 100 nm at an X-ray energy of less than 1 keV requires a numerical aperture larger than 0.01. This leads to difficulties in the fabrication of a soft X-ray focusing mirror with high accuracy. Ellipsoidal mirrors enable soft X-ray focusing with a high numerical aperture. In this study, we report a production process for ellipsoidal mirrors involving mandrel fabrication and replication processes. The fabricated ellipsoidal mirror was assessed under partial illumination conditions at the soft X-ray beamline (BL25SU) of SPring-8. A focal spot size of less than 250 nm was confirmed at 300 eV. The focusing tests indicated that the proposed fabrication process is promising for X-ray mirrors that have the form of a solid of revolution, including Wolter mirrors.

1 February 2019 in Review of Scientific Instruments
Verified
Journal Article
Closed access
TKTakehiro Kume
Takehiro Kume
YTYoshinori Takei
Yoshinori Takei
SESatoru Egawa
Satoru Egawa
HMHiroto Motoyama
Hiroto Motoyama
YTYoko Takeo
Yoko Takeo
HMHidekazu Mimura
Hidekazu Mimura
An x-ray ellipsoidal mirror is an ideal tool for focusing soft x-rays. Because nanometer-level shape accuracy is required in the internal surface of a mirror having a small diameter, it is difficult to fabricate the mirror by processing the surface directly. We developed a fabrication process for soft x-ray ellipsoidal mirrors in which the surface of a high-precision quartz mandrel with the inverted shape of the designed mirror is replicated by nickel sulfamate electroforming. In this study, an ellipsoidal mirror of 40-mm length was fabricated and the shape accuracy of the replicated surface was evaluated by a measurement method using a contact probe. The root mean square (RMS) of the replication error in the entire measured surface was 27.2 nm. When the evaluated area was half the replicated surface near the middle of the mirror, the RMS of the replication error was 14.7 nm. Wave-optical simulation suggested that it is possible to focus soft x-rays to a spot with a diameter of 400 nm.

17 June 2019 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
HMH. Motoyama
H. Motoyama
AIA. Iwasaki
A. Iwasaki
YTY. Takei
Y. Takei
TKT. Kume
T. Kume
SES. Egawa
S. Egawa
HMH. Mimura
H. Mimura
We demonstrate broadband focusing of multiple high-order harmonics of intense femtosecond laser pulses using an ellipsoidal mirror. The ellipsoidal mirror, with a high numerical aperture and a highly accurate surface, was fabricated using a replication process. The multiple high-order harmonics in the wavelength range between 10 and 20 nm were focused to the nearly diffraction-limited size of 350 × 380 nm2. According to Rayleigh's quarter wavelength criteria, the wavefront aberration of the focused beam was estimated to be less than 5 nm, which corresponds to a temporal dispersion of 16 as. The developed focusing system is suited for producing an intense attosecond laser field with negligible wavefront aberration, with which nonlinear light-matter interactions in the attosecond time domain can be explored.

10 July 2020 in Journal of Synchrotron Radiation
Verified
Journal Article
Open access
PDF file
YSYasunori Senba
Yasunori Senba
HKHikaru Kishimoto
Hikaru Kishimoto
YTYoko Takeo
Yoko Takeo
HYHirokatsu Yumoto
Hirokatsu Yumoto
TKTakahisa Koyama
Takahisa Koyama
HOHaruhiko Ohashi
Haruhiko Ohashi
A focusing optics that can provide a sub-micrometre high-flux probe for soft X-ray micrometre-scale angle-resolved photoemission spectroscopy (ARPES) is proposed. A monolithic Wolter-type mirror with a large acceptance, achromatism and small comatic aberration was designed and evaluated. A focused beam size of 0.4 µm (vertical) × 4 µm (horizontal), a high throughput of 59% and a high tolerance of 1.6 mrad to the pitching error were realized at a photon energy of 1000 eV. A Wolter-type mirror can be practically employed as a stable sub-micrometre focusing mirror with high throughput in ARPES applications.

23 March 2020 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
YTYoko Takeo
Yoko Takeo
ASAkihiro Suzuki
Akihiro Suzuki
HMHiroto Motoyama
Hiroto Motoyama
YTYoshinori Takei
Yoshinori Takei
TKTakehiro Kume
Takehiro Kume
HMHidekazu Mimura
Hidekazu Mimura
Ellipsoidal mirrors are promising optical devices for soft x-ray focusing. A fabrication process consisting of master fabrication and replication has been developed to produce ellipsoidal mirrors with wide apertures of approximately 10 mm. In the present study, the focusing performance of an ellipsoidal mirror was evaluated using soft x-rays in the soft x-ray beamline BL25SU-a of SPring-8. The focus sizes were measured at photon energies of 300, 400, and 500 eV. A quantitative figure error of the ellipsoidal mirror was also evaluated by analyzing the wavefield of the focused beam retrieved using ptychography. The figure error distributions measured at different photon energies agreed with each other at a root mean square level of 1 nm. The developed focusing system can be used for various types of microscopy, allowing the use of a wide range of x-ray energies.