Electrochemical impedance spectroscopy (EIS) is used widely in electrochemistry. Obtaining EIS data is simple with modern electrochemical workstations. Yet, analyzing EIS spectra is still a considerable quandary. The distribution of relaxation times (DRT) has emerged as a solution to this challenge. However, DRT deconvolution underlies an ill-posed optimization problem, often solved by ridge regression, whose accuracy strongly depends on the regularization level This article studies the selection of using several cross-validation (CV) methods and the L-curve approach. A hierarchical Bayesian DRT (hyper- ) deconvolution method is also analyzed, whereby a parameter analogous to is obtained through CV. The analysis of a synthetic dataset suggests that the values of selected by generalized and modified generalized CV are the most accurate among those studied. Furthermore, the analysis of synthetic EIS spectra indicates that the hyper- approach outperforms optimal ridge regression. Due to its broad scope, this research will foster additional research on the vital topics of hyperparameter selection for DRT deconvolution. This article also provides, through pyDRTtools, an implementation, which will serve as a starting point for future research.
The suitability of a battery for a given application depends on its metrics for energy (W h kg−1 and/or W h L−1), power (W kg−1 and/or W L−1), cost ($ per kWh), lifetime (cycles and/or years), and safety. This paper provides a data-driven perspective explaining how material properties, cell design decisions, and manufacturing costs influence and control these metrics. Insights drawn from the literature and past experience are supported by 200 000+ Monte Carlo simulations, which were conducted for lithium-ion batteries using the Battery Performance and Cost Model (BatPaC). A cell with optimal energy, power, and cost is best achieved with a high voltage and a low area specific impedance. If the focus is only on optimal energy and/or cost (i.e., where power is less critical), cells also benefit from active materials with high specific capacities. For example, the energy metric of 500 W h kg−1 can be met in cells with open circuit voltages less than 4 V only if the average specific capacity of the positive and negative materials is at least ∼500 mA h g−1. The values of other parameters (e.g., thicknesses, densities, and material costs) are shown to have less influence on achieving cell metrics. It is suggested that the best way to achieve optimal energy, power, and/or cost while maintaining long lifetimes and safe operation is through modification of these other parameters to facilitate the stable operation of materials with high voltage, high capacity, and low area specific impedance. It is also shown that new negative active materials must produce cells with an area specific impedance less than 85 Ω cm2 to be cost-competitive in all electric vehicles.
8 January 2025 in International Journal of Thermal Sciences