5 March 2018 in IEEE Transactions on Instrumentation and Measurement
By analyzing the error models of the measured vectors of the gravitational apparent motion, an in-motion filter-QUEST alignment method only with the inertial measurement unit is presented in this paper. The contribution of the proposed method lies in constructing the in-motion model of the measured vectors of the gravitational apparent motion and developing the extracted method to reconstruct the measured vectors. Furthermore, the relationship between the noise characteristic and the moving state of the vehicle is analyzed in detail. Different from the several current techniques, the presented method can be carried out without any other external additional equipment, when the vehicle is in-motion. With the designed real-time wavelet denoising (RWD) method, the high-frequency noises of the measured vectors are filtered. Based on the constructed parameter recognition model of the measured vectors, a robust adaptive Kalman filter is devised to estimate the optimal parameters, which are used to calculate the reconstructed observation vectors. Moreover, the gross outliers, which are contained in the filtered vectors of the RWD, are eliminated effectively. The simulation and the field trial results demonstrate that the presented method is applicable to the in-motion initial alignment, and it can serve as a nice initial alignment method in the follow-on fine alignment process and navigation process.
1 January 2023 in Journal of Physics: Conference Series
Aiming at the problems of complex machining and impeller structural strength of traditional centrifugal compressors, a new speed-ratio bladeless supercharging mechanism is proposed. The results show that the system pressure of the new structure increases with the increase of the rotating speed of the disk; while the maximum pressure of the outer cavity and the maximum pressure of the system change in a curve with the difference of the disk wall clearance, the diameter of the disk and the number of pipes in the disk. Based on the results of theoretical and simulation analysis, a bladeless pressurized structure test platform was established. The test results show that the working medium pressurization measured at the outlet of the mechanism is 0.1Mpa, and the experimental results have a high degree of agreement with the theoretical analysis.