4 June 2025 in IEEE Sensors Journal
Traditional beat-frequency quartz-enhanced photoacoustic spectroscopy (BF-QEPAS) is constrained by short energy accumulation time and the necessity of attenuation cycles, resulting in weaker signals and longer measurement cycles. In this work, we propose a novel scanning optomechanical enhanced (SOE-) BF-QEPAS technique to achieve ultrafast gas detection. By periodically scanning the modulation signal, we supplement excitation energy before the attenuation of the tuning fork’s vibrational energy, thereby optimizing energy accumulation efficiency. For the first time, we introduce a comprehensive quality factor K to evaluate the integrated performance of the system in terms of energy efficiency and signal-to-noise ratio (SNR). After parameter optimization, the SNR demonstrated a 1.88-fold improvement compared to conventional BF-QEPAS, while the response speed increased by 200-400 times.
20 June 2025 in Transactions of the Institute of Measurement and Control
The tail-sitter aircraft’s transition control between the vertical take-off and landing mode (VTOL) and the level flight mode is plagued by drastic model changes, significantly complicating the flight control design during the transition phase. This paper presents an enhanced active disturbance rejection control (ADRC) technique using distributed dynamic pressure gain compensation for twin-engine flying wing-type tailstock aircraft as the specific research object. The observer model of the active disturbance rejection controller is improved according to the appropriately simplified model, and the different flight stages are unified into a single continuous flight mode in combination with the dynamic pressure detection gain adjustment. The problem of model change in the transition process is effectively solved. During the real flight test, the aircraft’s attitude change from 0° to 90° causes significant changes in the model parameters; however, the tail-sitter aircraft maintains a smooth transition control effect.