We demonstrate an InP-based mid-infrared photonic integrated circuit processed from a wafer in which two distinct quantum cascade laser active regions are grown in different areas on the same InP crystal. A passive InGaAs waveguiding layer is epitaxially deposited on top of the entire InP substrate prior to the laser active region growth to optically couple the lasers emission and to multiplex their emission wavelengths to a single output waveguide. The method demonstrated in this work enables the creation of monolithic photonic integrated circuits with emission wavelength spanning the entire 3-15 µm spectral range and it is of interest for a wide range of applications.
A continuous wave operating quantum-cascade-laser without injector is presented. The core design was taken from a low-threshold pulsed staircase laser. The active zone of one sample was optimized for low threshold current densities, using 60 periods and a low doping of 2.4×1010cm−2∕period. The second sample consists of 50 periods and a high doping of 6.3×1010cm−2∕period. For the first (second) sample, the threshold current density at 77K for continuous operation was measured with 0.13 (0.24)kA∕cm2 and maximum output power of 16.2 (22.7)mW was observed. Continuous operation was maintained up to 140K for both lasers.
Terahertz quantum cascade laser sources based on intra-cavity Cherenkov difference-frequency generation in dual-wavelength mid-infrared quantum cascade lasers are currently the only monolithic semiconductor laser technology that can deliver continuous-wave coherent terahertz output at room temperature. Because the Cherenkov difference-frequency generation process enables terahertz radiation generation and extraction across a wide range of frequencies, it is often assumed that phase-matching conditions for this process are automatically fulfilled. We theoretically analyze and experimentally demonstrate that phase-matching plays an important role in these devices, and significant improvements in terahertz power output can be achieved by adjusting the waveguide configuration of the quantum cascade lasers to provide better phase-matching.