16 December 2024 in IEEE Sensors Journal
This paper presents a portable optical fiber sensor (OFS) design for continuous liquid level measurement, fabricated using two pieces of bare polymer optical fibers (POFs). The proposed sensor design utilizes the twisted coupling technique, where two optical fibers are twisted and coupled, leading to power coupling from the illumination fiber to the coupled fiber. The casing is fabricated through a 3D printing method. The 3D-printed casing is utilized to mount the sensor onto a smartphone, facilitating the connection of the fibers to both the flashlight and the camera. The flashlight serves as the light source, while the camera records the intensity variations. The liquid level sensing relies on the coupling loss, where the light is transmitted to the illumination fiber, and the twisted coupled fiber couples the power, exhibiting intensity variations with changing liquid levels. The proposed liquid level sensor can measure depths up to 120 mm with a sensitivity of 0.053 ± 0.002 % per mm and an impressive resolution of 0.05 mm. The experimental findings indicate that the proposed sensor has excellent stability and reliability. The sensor’s straightforward, comprehensive, and cost-effective design enables its application in chemical, petroleum, and many other industries.
24 June 2025 in Journal of Lightwave Technology
This paper presents a portable dual-point optical fiber sensor system for continuous liquid level measurement using polymer optical fibers (POFs). The system contains sensor design and integration with smartphone. The sensor design employs a twisted coupling technique, where two bare optical fibers are twisted together, allowing power to transfer from the illumination fiber to the coupled fiber. The 3D-printed casing mounts into smartphone where the sensor system is attached to casing. The light is launched from the smartphone's flashlight and next end of fiber is to the camera. The flashlight serves as the light source, and the camera records intensity variations caused by changes in the liquid level. Experimental results demonstrate a linear response in optical power intensity as liquid levels increase, allowing for precise measurement of levels up to 120 mm simultaneously. Sensor-1 achieved a sensitivity of 0.050%/mm and sensor-2 exhibited a sensitivity of 0.033%/mm, with a resolution of 0.05 mm. Both sensors showed stable and consistent performance during ascent and descent phases of liquid level measurement. This cost-effective, portable sensor system offers high accuracy and reliability, making it suitable for industrial applications such as chemical processing and environmental monitoring.