Self-sustained thermoacoustic oscillations as observed in low-emission combustion- involved gas turbines and aero-engines involve complicated thermal fluid–acoustics interaction and rich nonlinear dynamics. Such pulsating oscillations are known as thermoacoustic instability. When it occurs, large-amplitude limit cycle oscillations (LCOs) of thermodynamic parameters are frequently observed. These LCOs could cause overheating, flame flashback, and even engine failures. Thus it is critical to understand and predict the generation mechanisms and nonlinear dynamics behaviours, and then develop corresponding control approaches to prevent or control the onset of such instabilities. In this work, we develop and extend the classical van der Pol oscillators by integrating a physics-informed neural networks (PINNs) algorithm with a modelled nonlinear Rijke-type thermoacoustic combustor. The theoretical Rijke tube system (with Galerkin expansion and modified King's law implemented) and a CFD simulation model are applied to provide ‘training/calibration data’ for the extended van der Pol (EVDP)-PINNs model. The optimized EVDP oscillators are confirmed to be capable of capturing the key nonlinear characteristics by comparing the transient growth behaviours of thermodynamic perturbations and LCO amplitude and frequency. Further investigations are conducted to obtain Hopf bifurcation and amplitude death (AD) characteristics. Comparison is then made to the coupled EVDP systems. Quite similar Hopf bifurcation features, but differences in regions of AD, are observed. In general, we demonstrate an applicable approach to intelligently ‘learn’ a nonlinear thermoacoustic system and to create reliable EVDP oscillator systems, which have great potential to contribute to the development and testing of control approaches, such as the coupling described in this work, which may replace costly experimental tests.
Combustion instability frequently occurs in propulsion and power generation systems. It is characterized by large-amplitude acoustic oscillations leading to undesirable consequences. Designing a stable combustor by predicting its stability characteristics is therefore essential. This study centers upon modeling a straight one-dimensional combustor with an acoustically compact heat source, low Mach numbers, and different end point conditions. To predict the stability characteristics, we examine six combustor configurations (open–closed, closed–closed, open–choked, closed–choked, open–open, and closed–open). A Galerkin expansion technique is implemented to capture the acoustic disturbances. The unsteady heat release is modeled using an N−τ formulation. The results show that steepening of the mean temperature gradient causes the eigenfrequency associated with an open outlet to increase more rapidly than that of a choked nozzle. Compared to a choked boundary, an open outlet generates higher eigenfrequencies and lower sound energy when coupled with an open inlet. Conversely, it triggers lower eigenfrequencies and higher sound energy using a closed inlet. The maximum possible growth of sound energy, Gmax, remains positively correlated with the inlet temperature, interaction index N, and inlet Mach number, but inversely proportional to the temperature gradient. The heat source extrema leading to the most and least amplified system energy seem to shift upstream, when the mean temperature gradient is successively increased. Their coordinates are similar in half-open tubes and exhibit a converse relation between the open–open and closed–choked tubes. At sufficiently low Mach numbers, the choked and closed outlets show equivalence in acoustic frequencies, transient energy evolution, and optimal heat source locations.
In this study, we theoretically investigate the impact of outlet boundary conditions and mean temperature gradients on the maximum transient growth rate of acoustical energy and the critical energy required for triggering. Our analysis encompasses open–open and open–closed thermoacoustic systems. The theoretical models developed focus on horizontal ducts with a mean temperature jump over the heat source, employing the modified King's law. By linearizing the unsteady heat release, the nonlinear thermoacoustic equations transform into linearized-delay ones. This approach enables us to predict optimal initial perturbations for linearized-delay and nonlinear systems, corresponding to maximum transient growth rates of acoustic energy over short and long periods, respectively, thus providing insights into critical energy for triggering. We find that a closed outlet leads to higher transient energy growth and a lower critical energy for triggering compared to an open outlet. The increased mean temperature gradient has a “destructive” impact on triggering in open–open systems but a “constructive” effect in open–closed systems. Raising the mean temperature ratio generally increases the critical energy for triggering in the open–open system, whereas it decreases the critical energy in the open–closed system. The critical energy for nonlinear optimal initial perturbations is notably affected by the minimum energy of critical unstable periodic solutions, while the critical energy for linearized-delay optimal initial perturbations is closely tied to the energy level of stable periodic solutions. Due to the transient energy growth rate, the critical energy for nonlinear optimal initial perturbations is significantly lower than that for linearized-delay optimal initial perturbations.
13 September 2025 in Journal of Sound and Vibration