Getting the most out of muscles: Materials that convert electrical, chemical, or thermal energy into a shape change can be used to form artificial muscles. Such materials include bimetallic strips or host-guest materials or coiled fibers or yarns (see the Perspective by Tawfick and Tang). Kanik et al. developed a polymer bimorph structure from an elastomer and a semicrystalline polymer where the difference in thermal expansion enabled thermally actuated artificial muscles. Iterative cold stretching of clad fibers could be used to tailor the dimensions and mechanical response, making it simple to produce hundreds of meters of coiled fibers. Mu et al. describe carbon nanotube yarns in which the volume-changing material is placed as a sheath outside the twisted or coiled fiber. This configuration can double the work capacity of tensile muscles. Yuan et al. produced polymer fiber torsional actuators with the ability to store energy that could be recovered on heating. Twisting mechanical deformation was applied to the fibers above the glass transition temperature and then stored via rapid quenching. Science , this issue p. 145 , p. 150 , p. 155 ; see also p. 125
Twisting is cool: Rubber bands that are stretched and held in an extended shape for a while will extract heat from their surroundings as they are allowed to relax, owing to a reversal of stress-induced crystallization, which is an exothermic process. Wang et al. examine the potential for solid-state cooling of twisted fibers, along with configurations such as supercoiling, for materials including natural rubber, polyethylene, and nickel-titanium fibers. The cooling is related to the change in entropy of the material as it is mechanically deformed. Science , this issue p. 216
Pump it up: Carbon nanotube yarns can be used as electrochemical actuators because infiltration with ions causes a contraction in length and an expansion in diameter. Either positive or negative ions can cause this effect. Chu et al. constructed an all-solid-state muscle that eliminated the need for an electrolyte bath, which may expand the potential for its use in applications. By infiltrating the yarns with charged polymers, the fibers start partially swollen, so the length can increase through the loss of ions. It is thus possible to increase the overall stroke of the muscle. Further, these composite materials show a surprising increase in stroke with scan rate. Science , this issue p. 494
The ability to achieve simultaneous intrinsic deformation with fast response in commercially available materials that can safely contact skin continues to be an unresolved challenge for artificial actuating materials. Rather than using a microporous structure, here we show an ambient-driven actuator that takes advantage of inherent nanoscale molecular channels within a commercial perfluorosulfonic acid ionomer (PFSA) film, fabricated by simple solution processing to realize a rapid response, self-adaptive, and exceptionally stable actuation. Selective patterning of PFSA films on an inert soft substrate (polyethylene terephthalate film) facilitates the formation of a range of different geometries, including a 2D (two-dimensional) roll or 3D (three-dimensional) helical structure in response to vapor stimuli. Chemical modification of the surface allowed the development of a kirigami-inspired single-layer actuator for personal humidity and heat management through macroscale geometric design features, to afford a bilayer stimuli-responsive actuator with multicolor switching capability.