This study presents the electrochemical behaviors and thermodynamic properties of Ce on liquid Bi, Sn, and Zn electrodes in molten LiCl-KCl eutectic salt. First, the Ce-metal binary systems on the solid tungsten electrode were investigated to determine the formation of Ce-metal intermetallic compounds during the electrowinning process. In these experiments, the formation of five Ce–Bi intermetallic compounds, eight Ce–Sn intermetallic compounds, and nine Ce–Zn intermetallic compounds was confirmed from the oxidation peaks of cyclic voltammetry. The standard Gibbs free energy of formation of each intermetallic compound was calculated from plateaus of the open-circuit chronopotentiometry. Subsequently, the electrochemical behaviors of Ce were investigated on liquid Bi, Sn, and Zn electrodes using cyclic voltammetry. In particular, while the reduction potentials of Li and Ce were too close to differentiate on the liquid Bi and Sn electrodes, they were not on the liquid Zn electrode. Peak potentials from cyclic voltammetry were utilized to calculate the activity coefficients of Ce in the liquid Bi, Sn, and Zn electrodes, which were 3.16 × 10 −14 , 1.82 × 10 −12 , and 9.05 × 10 −10 , respectively.
7 March 2024 in Journal of the Electrochemical Society
Compared to direct current (DC) techniques, electrochemical impedance spectroscopy (EIS) allows for a more accurate determination of the diffusion coefficient of metal ions in electrodeposition reactions. However, its actual application has been less attempted due to the difficulty in determining complex parameters, such as the concentration of deposited species in the electrode matrix. Here, we introduce a simplified approach to facilitate the EIS application to electrodeposition reactions, using the Co(II)/Co(0) reaction in molten LiCl-KCl salt as a case study. The working electrode surface area was determined by the photography of the electrochemical cell taken in situ. The diffusion coefficients of Co(II) in the LiCl-KCl salt, determined by EIS, were found to be (3.56 ± 0.49) × 10−5 cm2/s and (1.61 ± 0.12) × 10−5 cm2/s for the tungsten and liquid bismuth electrodes, respectively. The possible reasons for the observed discrepancy in the diffusion coefficients of Co(II) obtained from the two different electrodes were discussed.
A clear understanding of the anodic dissolution behavior of zirconium in molten LiCl–KCl salt plays an essential role in developing the electrometallurgical recycling of spent nuclear-fuel cladding. In this study, we utilized a real-time optical monitoring system designed for molten salt systems to investigate the passive and transpassive dissolution behavior of zirconium in molten LiCl–KCl eutectic salt. Constant-potential dissolution experiments were performed at the potential at which passive or transpassive dissolution of zirconium occurs. The formation of a thin film layer on the zirconium electrode was observed during passive anodic dissolution. We discovered the unique phenomenon that a white-colored agglomerate is formed on the zirconium-electrode surface during transpassive anodic dissolution (0.00 V vs. Ag|AgCl 10 wt%). The chemical analysis results showed that the agglomerate consists of potassium hexachlorozirconate (K2ZrCl6) and LiCl–KCl. The formation of the K2ZrCl6 agglomerate on the zirconium electrode is due to the solubility limit of tetravalent zirconium in molten LiCl–KCl salt.
25 March 2025 in Nuclear Engineering and Technology
This study demonstrates the pulsed-potential electrodeposition of reduced Zr species (ZrCl and Zr) in a molten LiCl–KCl salt. We report, for the first time, a new reduction reaction of Zr species (−1.90 V vs Ag/AgCl 10 wt%) in molten LiCl–KCl salt, characterized by cyclic-voltammetry experiments using W and Zr electrodes. The pulsed-potential electrodeposition experiments were performed using an inert W-foil electrode in a molten ZrCl4–LiCl–KCl salt. Three cathodic-pulse potentials (−1.30, −1.60, and −1.90 V) were applied, and the chemical and structural characteristics of respective deposits were compared. The deposits were characterized by scanning electron microscopy with energy-dispersive x-ray spectroscopy, x-ray diffraction analysis, and Raman spectroscopy. Additionally, we accomplished the pulsed-potential electrodeposition (>103 A m−2) of α-Zr metal with a practical ZrCl4 concentration (2.6 wt%). The results confirm that pulsed-potential electrodeposition can be employed for the selective deposition of the α-Zr metal by minimizing the co-production of ZrCl in molten LiCl–KCl salt while achieving excellent adhesion to the inert W electrode.