15 April 2024 in Nature Communications
Commonly-used ether and carbonate electrolytes show distinct advantages in active lithium-metal anode and high-voltage cathode, respectively. While these complementary characteristics hold promise for energy-dense lithium metal batteries, such synergy cannot be realized solely through physical blending. Herein, a linear functionalized solvent, bis(2-methoxyethyl) carbonate (BMC), is conceived by intramolecularly hybridizing ethers and carbonates. The integration of the electron-donating ether group with the electron-withdrawing carbonate group can rationalizes the charge distribution, imparting BMC with notable oxidative/reductive stability and relatively weak solvation ability. Furthermore, BMC also offers advantages including the ability to slightly dissolve LiNO3, excellent thermostability and nonflammability. Consequently, the optimized BMC-based electrolyte, even with typical concentrations in the single solvent, demonstrates high-voltage tolerance (4.4 V) and impressive Li plating/stripping Coulombic efficiency (99.4%). Moreover, it fulfills practical lithium metal batteries with satisfactory cycling performance and exceptional tolerance towards thermal/mechanical abuse, showcasing its suitability for safe high-energy lithium metal batteries.
18 October 2023 in Energy & Environmental Science
Due to the development of efficient non-fullerene acceptors with excellent crystallinity and effective inter-mixing with donor polymers, the power conversion efficiencies (PCEs) of organic solar cells (OSCs) have reached levels suitable for commercial implementation. Nonetheless, the poor operational stability of these OSCs remains a significant bottleneck, limiting their practical application and necessitating immediate attention. In an effort to address this issue, in the present study, we investigate the active layers fabricated using four different acceptors (BTP4F, IT4CL, IT4F, and PC71BM) blended with a conjugated polymer donor (PBDBT-2F). The corresponding OSCs demonstrate distinctly different π–π stacking characteristics. We utilize operando experiments to examine the temporal evolution of the active layer morphology as the OSCs operate under AM 1.5 G light illumination. We discover that, after device operation, the active layer for all types of devices develops a finer structure with more isolated domains, particularly for larger-sized domains. In addition, the morphology of the middle-sized domains is more influenced at the initial operating stage of OSCs with relatively poor π–π stacking, resulting in a more severe performance decay of these devices. Moreover, the decrease in PCE is primarily attributed to a decrease in the fill factor (FF), with decay curves displaying a similar trend to the structural shrinkage. Notably, we observe that the stability of the active layer morphology in the device geometry is not optimal for well-intermixed donor–acceptor systems with notable face-on crystallinity compared to slightly de-mixed donor–acceptor systems with good π–π stacking. This behavior is consistent with the different degrees of resilience of device performance.
24 June 2024 in ACS Applied Materials & Interfaces
Poly(ethylene oxide) (PEO)-based composite electrolytes (PCEs) are considered as promising candidates for next-generation lithium-metal batteries (LMBs) due to their high safety, easy fabrication, and good electrochemical stability. Here, we utilize operando grazing-incidence small-angle and wide-angle X-ray scattering to probe the correlation of electrochemically induced changes and the buried morphology and crystalline structure of the PCE. Results show that the two irreversible reactions, PEO-Li+ reduction and TFSI- decomposition, cause changes in the crystalline structure, array orientation, and morphology of the PCE. In addition, the reversible Li plating/stripping process alters the inner morphology, especially the PEO-LiTFSI domain radius and distance between PEO-LiTFSI domains, rather than causing crystalline structure and orientation changes. This work provides a new path to monitor a working battery in real time and to a detailed understanding of the Li+ diffusion mechanism, which is essential for developing highly transferable and interface-stable PCE-based LMBs.
21 May 2025 in Nature Communications
Ionic devices, such as electrochemical capacitor diodes (CAPodes) and gate-controlled CAPodes with transistor-like gating characteristics (G-CAPodes), offer a novel approach to energy-efficient and nature-inspired logic computing. Their miniaturization and integration render them ideal for ion-transistor circuits, enabling the regulation and signaling of ions and biomolecules. Here, we report an asymmetric system to achieve a potential-driven ion pump for CAPode based on a redox-active Keggin-type electrolyte. This unidirectional capacity is achieved through asymmetric polarization between a plane metal and a porous carbon electrode, enabling selective redox reactions on the metal surface. The nanoporous carbon effectively balances the charge on the redox electrode, while redox couples control the working voltage range. Printed ionologic devices are demonstrated for logic gates, and an integrated NAND (NOT-AND) circuit was constructed using two CAPodes and one G-CAPode. This work proposes a concept for switchable iontronic devices, providing a deeper understanding and applicability of these devices.
29 April 2024 in ACS Applied Materials & Interfaces
18 April 2025 in Nano Energy