This article presents an examination of well-controlled patterns created using a Ga+-based focused ion beam (FIB) on glass, while silicon substrates were used to evaluate the FIB performance by its achievable feature size versus time constraints. The pattern creation on glass was developed with the aim of studying potential surface-enhanced Raman spectroscopy (SERS) applications. Furthermore, the FIB was used to create dimer systems of periodically and randomly positioned dumbbell-shaped pits on the glass (each dimer occupies an area of 203 × 87 nm2). By following the bitmap pattern files, the FIB ensured there was 3000 dimer fabrication over a 20 × 20 μm2 large area, with a pit size and position variation below 10 nm. The article highlights that FIB can be used for precise large-area nano-fabrication. The gold nanoparticle dimers were formed on the prepatterned surface via capillary force-assisted deposition. The fabricated nanostructures were tested in SERS measurements. The enhancement factor for Rhodamine B molecule reached ~105, demonstrating the potential application of the method to create nanostructures in the sensor domain.
Recently, Na0.5Bi0.5TiO3 and its solid solutions are receiving intensive study as one of the most perspective lead-free ferroelectrics. Not only physical properties, but also the structure and nature of phase transitions of these compositions are of great interest, as their previous studies contain many uncertainties. In the present research, Na0.5Bi0.5TiO3 and 0.95Na0.5Bi0.5TiO3–0.05CaTiO3 solid solutions were thoroughly studied focusing on the elastic and thermal expansion characteristics, accompanying the obtained results by x-ray diffraction, scanning electron microscopy, differential calorimetry, and second harmonic generation measurements. Temperature-frequency dependences of dielectric permittivity were observed to be similar for both compositions. In spite of this, the experimentally obtained temperature dependences of thermal expansion and Young's modulus in Na0.5Bi0.5TiO3 and 0.95Na0.5Bi0.5TiO3–0.05CaTiO3 reveal unambiguous differences in the temperature range of the observed or expected (as in the case of Na0.5Bi0.5TiO3) phase transitions. X-ray diffraction patterns are fitted using Pnma symmetry. This allows us to distinguish the temperature regions with different behaviors of lattice parameters, which correlate with the observed behavior of thermal expansion and Young's modulus. A reduction in the intensity of second optical harmonic was observed upon increasing the temperature in the whole studied temperature range. This encourages us to reconsider the mechanism responsible for the temperature dependence of dielectric permittivity.
The structural, electromechanical, and dielectric properties of (1 − x)(0.8Na0.5Bi0.5TiO3-0.2BaTiO3)-xCaTiO3 [(1 − x) (0.8NBT-0.2BT)-xCT] ceramics are studied as candidates for room temperature actuators with high field-induced strain. The choice of 0.8NBT-0.2BT as a starting composition is motivated by the large tetragonality in this concentration range, even though it is located far away from the morphotropic phase boundary. CaTiO3 was chosen as a third component to decrease the depolarization temperature and achieve a high field-induced strain at room temperature. The measured strains at the field-induced phase transition are remarkably lower than might be expected from the jump in unit cell parameters at the phase transition. This inconsistency could be related to an incomplete field-induced phase transition from the ferroelectric phase to the nonpolar phase. Among all of the manufactured samples, the phase transition is close to room temperature in the composition with x = 0.100, which allows obtaining unipolar strains up to 0.23% at E = 65 kV/cm. Electrostrictive-like strain was observed not only above the depolarization temperature but also in the region of field-induced phase transition.