A slurry-based coating method utilizing lithium metal powder (LMP) has been developed as an alternative to traditional extrusion and pressing processes for lithium (Li) metal electrode production, enabling the fabrication of ultra-thin and broad-width Li electrodes through coating condition optimization. LMP electrodes, however, face significant challenges including delamination of the LMP composite layer from the copper current collector (Cu CC) due to electrolyte infiltration at the interface, and degradation of interfacial connectivity during charge-discharge cycles. To resolve these limitations, an adhesive-conductive polymer (AC-polymer) interlayer, composed of poly(3,4-ethylenedioxythiophene) (PEDOT) and poly(styrene sulfonate-co-acrylic acid) (P(SS-co-AA)), was introduced between the LMP composite layer and Cu CC for enhanced interfacial stability. Implementation of the AC-polymer interlayer resulted in a reduction of Li stripping overpotential from 89.8 mV to 35.8 mV (60 % decrease) and improved cycling stability, demonstrating 91% capacity retention at 4 mA cm–2 discharging rate after 150 cycles in carbonate-based electrolyte. The successful fabrication of a 300 mm-wide and 20 μm-thick slurry-coated AC-LMP electrode demonstrates the potential for practical application in Li metal batteries.