Renjie Li

Renjie Li

Auto-generated profile, based on publicly available information

Renjie Li

School of Automation Science and Electrical Engineering, Beihang University, Beijing, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 September 2021 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YSYaoxing Shang
Yaoxing Shang
RLRenjie Li
Renjie Li
SWShuai Wu
Shuai Wu
XLXiaochao Liu
Xiaochao Liu
YWYi Wang
Yi Wang
ZJZongxia Jiao
Zongxia Jiao
The aircraft braking system is a critical system used to slow down and stop the aircraft. Typically, the aircraft braking system usually uses the electro-hydraulic pressure servo-valve (EHPSV) to regulate the braking pressure of the aircraft. However, the pilot stage of EHPSV which has very precise orifice is easy to be blocked and leads to terrible fault. The on / off valve is robust to oil contamination and has better stability, but it is challenging to achieve high-precision pressure regulation. In order to guarantee the braking efficiency of aircraft, a high-precision pressure regulation algorithm is required. In this study, a algorithm with on / off valve array unit is studied to optimize the pressure regulation performance. The characteristics of the on / off valve under different actuation times and pressures are derived. Based on this characteristics, a novel algorithm which can predict the required number of on / off valves and actuation time obtained by the unknown input state observer. Then the proposed algorithm is validated both by simulations and experiments. The results show that the proposed regulation algorithm in this study can achieve high-precision pressure regulation for aircraft braking application, which the regulation precision is better than 0.2 MPa, and the overshoot is less than 2.5%.

17 April 2024 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
RLRenjie Li
Renjie Li
WQWeizhi Qiao
Weizhi Qiao
XLXiaochao Liu
Xiaochao Liu
HJHongtao Jin
Hongtao Jin
XGXiang Gao
Xiang Gao
ZJZongxia Jiao
Zongxia Jiao
The aircraft braking system is an essential subsystem of the aircraft, with high safety requirements. The conventional aircraft braking system has complex and long pipelines that are prone to leakage and vibration. To improve the reliability and safety of the aircraft, a dual-redundancy more-electric braking system (DMEBS) based on on / off valves was proposed. The DMEBS has dual-redundant nonsimilar hydraulic power sources to improve the reliability of the system. The on / off valves were utilized as brake control valves to improve the robustness of the system. In addition, an energy management strategy and a high-precision brake pressure regulation algorithm were designed for the DMEBS. The rule-based logical threshold energy management strategy relies on real-time velocity and multiple thresholds for allocating hydraulic power sources, aiming to reduce the electrical power of the DMEBS. The nonlinear flow rate control method (NFRCM) can realize high-precision brake pressure and low power. A prototype was developed, and then, it was tested on an experimental bench and a ground inertial test bench to verify the performance of the DMEBS and regulation strategy. The experimental results show that the pressure error of the NFRCM is within 0.2 MPa, while the standard deviation and other indicators show superior performance compared to conventional controllers.

5 January 2026 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
SWShuai Wu
Shuai Wu
YWYi Wang
Yi Wang
RLRenjie Li
Renjie Li
HJHongtao Jin
Hongtao Jin
CHChenglin Hou
Chenglin Hou
ZJZongxia Jiao
Zongxia Jiao
Digital hydraulic systems (DHSs) are increasingly adopted in aerospace applications due to their high reliability and robustness. However, the dynamic performance of the high-speed on/off valve (HSV) directly affects system response and control accuracy, while aerospace applications simultaneously impose stringent demands on miniaturization. Existing HSV struggle to resolve the tradeoff between high performance and a compact form factor. To address this challenge, this study proposes a novel integrated HSV pair (IHSVP) combined with an opposite reverse-drive three-level strategy (ORTS). Structurally, the IHSVP utilizes a single mover to cooperatively control two ports, achieving a three-position three-way configuration. This innovative design enhances integration and reduces weight while preserving servofunctions. Strategically, the ORTS facilitates active, high-speed closure by energizing an opposing coil. The proposed design is validated through electromagnetic finite element and multiphysics simulations. Experimental results demonstrate that the proposed IHSVP with ORTS, when compared to conventional designs, shortens the total closing time by 59%, expands the linear zone of average flow characteristics by 29%, and completely eliminates pressure overshoot in the step response. These results confirm that the IHSVP with ORTS resolves the conflict between dynamic performance and compactness.

14 May 2025 in Chinese Journal of Mechanical Engineering
Verified
Journal Article
Open access
PDF file
RLRenjie Li
Renjie Li
YSYaoxing Shang
Yaoxing Shang
JCJinglin Cai
Jinglin Cai
XLXiaochao Liu
Xiaochao Liu
LGLingdong Geng
Lingdong Geng
ZJZongxia Jiao
Zongxia Jiao
The aircraft braking system is critical to ensure the safe take-off and landing of the aircraft. However, the braking system is often exposed to high temperatures and strong vibration working environments, which makes the sensor prone to failure. Sensor failure has the potential to compromise aircraft safety. In order to improve the safety of the aircraft braking system, a fault detection and fault-tolerant control (FDFTC) strategy for the aircraft brake pressure sensor is designed. Firstly, a model based on a bidirectional long short-term memory (Bi-LSTM) network is constructed to estimate the brake pressure. Then, the residual sequence is obtained by comparing the measured pressure with the estimated pressure. On this basis, the improved sequential probability ratio test (SPRT) method based on mathematical statistics is applied to analyze the residual sequence to detect the fault. Finally, simulation and hardware-in-the-loop (HIL) testing results indicate that the proposed FDFTC strategy can detect sensor faults in time and efficiently complete braking when faults occur. Hence, the proposed FDFTC strategy can effectively deal with the faults of the aircraft brake pressure sensor, which is of great significance to improve the reliability and safety of the aircraft.

25 March 2026 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
RLRenjie Li
Renjie Li
XZXiwen Zhou
Xiwen Zhou
DWDele Wu
Dele Wu
SWShuai Wu
Shuai Wu
YWYi Wang
Yi Wang
High-performance braking systems are critical for the safety and efficiency of the more-electric aircraft. Digital valve braking systems, employing highly reliable and robust on/off valves, offer a promising alternative to conventional electro-hydraulic servo valves, which are prone to contamination. However, the discrete switching characteristics of on/off valves often cause undesirable pressure overshoot, fluctuations, and discontinuities. To overcome these limitations, this study proposes a novel variable-gain subdivision pressure control algorithm (VSPCA), which leverages the partially open mode of on/off valves to achieve near-continuous flow regulation. The VSPCA comprises three key components. The sliding window-based state identification module accurately identifies the braking stages to enable stage-adaptive control. The variable gain regulation module exploits the partially open mode of on/off valve to improve regulation precision. Furthermore, a low energy consumption driving strategy is combined with a subdivided execution period to enhance excitation time resolution and reduce energy consumption. Extensive experiments conducted on a digital brake valve performance test bench and a ground inertial test bench demonstrate the superior performance of the VSPCA. Compared with the conventional PNM+PWM strategy, the proposed VSPCA achieves a reduction of over 50% in the average tracking error and other key performance indicators under triangular wave commands. It delivers high-efficiency braking under both full-load and half-load conditions.

22 October 2025 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Closed access
RLRenjie Li
Renjie Li
SWShuai Wu
Shuai Wu
YWYi Wang
Yi Wang
HJHongtao Jin
Hongtao Jin
CHChenglin Hou
Chenglin Hou
ZJZongxia Jiao
Zongxia Jiao
The high-speed on/off valves (HSVs) have emerged as a significant research in hydraulic systems due to their superior robustness and additional advantages. To satisfy various operational requirements, digital valves typically consist of multiple parallel HSVs. However, conventional digital valve control algorithms exhibit limited precision and fail to ensure digital valve lifespan. To address these limitations, a digital valve three-stage gain intelligent regulation algorithm (DVTIRA) is proposed, comprising three-stage gain regulation algorithm, intelligent flow rate distribution algorithm (IFRDA), and execution strategy. The displacement and subdivision flow rate characteristics of the HSV reveal that the subdivision flow rate is generated during partial opening of the HSV. Based on these characteristics, the three-stage gain regulation algorithm is developed to achieve high-precision control. The IFRDA optimizes performance metrics, including digital valve lifespan, while the execution strategy ensures high-precision, low-energy consumption HSV command execution. The experiments are conducted on the DVTIRA, and results demonstrate that the DVTIRA significantly improve control precision of digital valve. Furthermore, the DVTIRA effectively minimizes switching cycles while maintaining high continuity and uniformity, thereby ensuring the digital valve lifespan.