Currently, H2 is overwhelmingly produced from fossil fuels, mainly from natural gas without CCS (grey H2). The global annual emissions from this practice amount to about 900 Mt CO2. This is comparable to the global emissions from air traffic or shipping. Such a practice cannot continue in a world targeting net zero emissions by 2050. There is an urgent need to retrofit grey H2 production with CCS and replace it with green H2 where possible. In addition, massive scale-up of clean H2 and H2-based energy carriers such as ammonia (NH3) are crucial for reaching the climate targets set by the Paris Agreement. Targets that were confirmed and strengthened at the COP26 in Glasgow. By 2030, the global market must increase from 90 to 200 MtH2/year if we are to reach IEA’s Net Zero Emissions by 2050 Scenario. If all planned H2-production projects are implemented, the global production will reach only 105 MtH2/year. A rapid ramp-up of production and end use in several sectors will require clean H2 from different sources. Integrating NH3 into the H2 value chain can increase flexibility and reduce emissions. Furthermore, commercially applied catalytic NH3 decomposition is fast at 700–900°C. The equilibrium conversion is 99% at 400°C, but slow reaction kinetics limit implementation. Commercially available NH3 crackers convert up to 2.5 tons/day, delivering H2 for industrial applications. For maritime and gas-turbine applications, a variable conversion rate in the range of 100 tons/day is needed. Therefore, NH3 crackers and advanced reactors need to be developed with improved load flexibility and increased efficiency. Currently, NH3 is not produced for energy purposes. The market for in the energy/fuel sector could become substantial. The aim of the present paper is to investigate ammonia cracking reaction using novel low-temperature catalysts synthesized from non-noble precursors, studied using advanced characterization techniques, kinetic studies for model development, and benchmarked at industry-relevant operating conditions against state-of-the-art reference materials. Different catalyst promoters, metal loadings will be investigated. The effect of temperature, pressure, GHSV on catalytic performance is also part of the study. Special attention will be on catalyst stability.