13 December 2024 in ACS Sustainable Chemistry & Engineering
10 May 2022 in Green Chemistry
Hydrothermal liquefaction (HTL) has emerged as a promising strategy for converting abundant, water-rich organic streams into an energy-dense, sustainable, biocrude. Despite major strides in improving oil yields and process intensification, a key underlying challenge persists in relating the composition of the feedstock to the ultimate fate of nitrogen, which is especially important for biocrude quality. To elucidate how nitrogen partitions into the respective gas, aqueous, oil and solid hydrothermal products, food waste was treated under HTL conditions (15 wt% solids, 575 K reaction temperature, and 1 hour reaction time) and elemental, chromatographic and mass spectroscopy analyses were performed on the products to establish dominant product classes and to close mass, carbon, and nitrogen balances. Liquid products (aqueous and biocrude) were found to contain nearly 60% of the nitrogen, with a majority of the biocrude-phase nitrogen in the form of amides. Ab initio thermodynamic and kinetic simulations on model reactants were used to evaluate potential reaction pathways involving reactive nitrogen intermediates. A subsequent kinetic model was evaluated at reaction temperatures ranging 300–1000 K and for a range of feedstock compositions to identify primary reaction pathways. The Maillard reaction is revealed to be the dominant pathway for converting reactive nitrogen intermediates into observed products, especially those in which nitrogen is present as a heterocyclic aromatic. Subsequent product analysis by Fourier Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR MS) confirms strong agreement among the experimental data, kinetic model and proposed Maillard pathways.
31 August 2022 in iScience
Food waste is an abundant and inexpensive resource for the production of renewable fuels. Biocrude yields obtained from hydrothermal liquefaction (HTL) of food waste can be boosted using hydroxyapatite (HAP) as an inexpensive and abundant catalyst. Combining HAP with an inexpensive homogeneous base increased biocrude yield from 14 ± 1 to 37 ± 3%, resulting in the recovery of 49 ± 2% of the energy contained in the food waste feed. Detailed product analysis revealed the importance of fatty-acid oligomerization during biocrude formation, highlighting the role of acid-base catalysts in promoting condensation reactions. Economic and environmental analysis found that the new technology has the potential to reduce US greenhouse gas emissions by 2.6% while producing renewable diesel with a minimum fuel selling price of $1.06/GGE. HAP can play a role in transforming food waste from a liability to a renewable fuel.
23 December 2022 in ACS Sustainable Chemistry & Engineering
18 April 2022 in ACS Sustainable Chemistry & Engineering
4 November 2024 in Sustainable Energy & Fuels
This study advances the fundamental understanding of the correlation between lignin structure and reactivity during hydrothermal liquefaction (HTL). Five different lignin varieties were obtained using the cosolvent enhanced lignin fraction (CELF) pretreatment; lignin sources were selected to represent a range of lignin types including softwood (pine), hardwood (poplar and maple), and agricultural (bagasse and corn stover) feeds and analyzed using conventional methods and new developed advanced solid-state 13C NMR (ssNMR) approaches. Molecular weight, relative quantities of syringol (S), guaiacol (G), and p-hydroxyphenyl monomers, as well as degree of condensation (DC) were measured for the lignin samples, providing a quantitative basis for structure–reactivity relationships. These lignin samples then underwent HTL at 300 °C for 1 h, and the resulting biocrude, water soluble, char, and gas products were quantified. Lignin properties were correlated to HTL yields and biocrude composition, which found feedstock S/G ratio as the strongest predictor of biocrude and char yields, followed closely by DC. Ultrahigh resolution mass spectrometry analysis of the biocrude was used to gain mechanistic insights into lignin reactivity during HTL, finding that biocrude consists of oligomers of lignin subunits composed of 2–5 monomers. The biocrude obtained from high S content lignin is enriched in dimers and trimers, explaining the high biocrude yields obtained from these feeds compared with low S content lignin. These insights significantly advance current understanding of lignin reactivity under hydrothermal conditions.