27 September 2021 in International Journal of Antennas and Propagation
In this paper, a novel 3D planar inverted-L antenna (PILA) Ultrahigh Frequency (UHF) Radio Frequency Identification (RFID) tag mountable on metallic surfaces is proposed for the Internet of Things (IoT) indoor localization applications. The proposed tag antenna (45mm×82mm×4mm or 0.137λ×0.25λ×0.012λ) is designed for mounting on metallic objects. The 3D PILA antenna is fabricated using a copper sheet of thickness 1mm and air as the dielectric substrate in order to minimize costs for materials and realization. In the design, T-slot has been inserted in the radiating element for tuning of the tags resonance for achieving good matching with the chip. Also, a simple equivalent circuit model has been obtained to analyze the impedance of the 3D PILA. Based on the optimized design, the fabricated prototype has been measured in the anechoic chamber. The resonant frequency of the proposed tag is stable, and it is not affected much by the metallic object. The measurement results of the antenna prototype demonstrated a reasonable agreement with the simulation results, and a read range of 3.6m was measured inside an anechoic chamber. Most importantly, in the building hallway, the proposed tag is able to achieve a maximum read distance of 18m with a transmitted power of 31.5dBm at 867MHz when placed on metal. With the 3D PILA antenna structure, the proposed antimetal tag is a suitable solution that can be integrated into an indoor localization scenario.
30 April 2015 in International Journal on Communications Antenna and Propagation (IRECAP)
A novel broadband magnetic Tag antenna for ultra-high frequency (UHF) near-field (NF) and far-field (FF) radio-frequency identification (RFID) applications is presented. This antenna is printed on an Rogers RT/duroid 5880 substrate with an overall size of 68 × 19.7 × 0.787 mm. The simulated bandwidth of the proposed Tag antenna is more than 100 MHz (860960MHz), which can cover the entire UHF RFID band. The proposed structure can generate a strong and uniform H-field distribution in the region around the antenna. The minimum power required to activate the Tag at 900 MHz is approximately of -12.6 dBm in the near-zone (18 cm) and 2.8 dBm in the far-zone (65 cm) in anechoic chamber. The measured read range is about 15 m when the transmission power level is 25 dBm in open environment. Measurements show that the antenna operating confirms good performance of Tag identification for near-field and far-field UHF RFID applications. Copyright © 2015 Praise Worthy Prize - All rights reserved.