1 January 2025 in Physics of Fluids
The contact erosion during the arc duration affects the attachment position of arc roots, directly determining the arc motion speed. In this paper, a two-way coupling model is proposed to study the interaction between contact edge erosion and arc root stagnation-transition during direct current air arc interruption. A two-dimensional transient model for contact erosion and droplet splashing is established using an improved level-set method, combined with the magnetohydrodynamic model of arc plasma and contact energy transfer, considering the mass transfer, heat transfer, and fluid flow during the arc root stagnation-transition comprehensively. The model's accuracy is verified through experiments. The results show that the arc root stagnation forms molten pool or even droplet splashing. Vortices below the moving contact interfere favorably with arc root transition. However, contact deformation induced by erosion affects heat dissipation at the arc root, weakens the vortices' aerodynamic performance, hastens vortex bubble rupture, and delays arc root transition. Increasing breaking speed and arc-blowing magnetic induction intensity shortens stagnation time and reduces edge erosion. However, the breaking speed more than 5 m/s or the magnetic induction intensity more than 50 mT shows no significant improvement on the arc root transition speed, while erosion intensifies when magnetic induction intensity exceeds 50 mT.
1 October 2023 in Physics of Fluids
The cathode sheath (CS) formation of the direct current air circuit breaker is simulated by a fluid model, and the influence of metal vapor concentration between the contacts after liquid metal bridge rupture is considered. The CS conductivity increases with the increasing concentration of copper vapor. The copper vapor concentration increases from 5% to 95%, and the thickness of the positive space charge layer and ionization layer increases from 22.3 and 49.1 μm to 51.8 and 81.7 μm, respectively. Increasing the CS conductivity is beneficial for the motion of arc roots in a certain range.
1 October 2025 in Physics of Fluids
To investigate the interaction between metal droplet motion and arc plasma dynamics during direct current interruption, an improved bidirectionally coupled model is developed based on magnetohydrodynamic theory. By incorporating the volume force exerted by the metal droplet into the momentum conservation equation, the model enables dynamic feedback between the air arc flow field and the metal droplet trajectories. The influence of droplet splashing (DS)-under varying velocities and particle sizes-on the flow field distribution within the contact gap is analyzed, and the mechanism of flow field reconstruction induced by metal droplet motion is revealed. Simulation and experimental results demonstrate that DS typically occurs under conditions such as current oscillation, which induces localized vortices in the flow field and inhibits the directional motion of the arc. Furthermore, metal droplets with larger diameters and higher velocities cause more severe disturbances to the arc-induced flow field.