Interest in understanding the structural behavior of marine floating photovoltaic (FPV) systems has grown significantly over the last decade. Numerical models are the preferred approach for understanding FPV responses under environmental loads, but they require validation. Several methods are commonly used to validate numerical results, such as comparison with analytical, field data, and experimental data. The use of analytical approaches to validate numerical results can sometimes be inaccurate due to the complexity of the problems; nevertheless, field data is commonly restricted and frequently unavailable for numerical model validation. Thus, physical models play a crucial role in validating numerical results. This study focuses on the two-dimensional (2-D) modeling process and sensors development for an FPV system with taut mooring, aiming to investigate wave-structure interaction while considering hydroelastic effects. The model is developed in accordance with the Froude-Cauchy similitude law and is made from composite materials to capture structural stiffness. Structural motions, specifically heave and pitch, are measured using an Inertial Measurement Unit (IMU), while strain gauges measure structural stress and mooring tension. The sensors provide precise measurements for strain and pitch; however, heave, as a result of time-domain integration from acceleration, requires further validation. The motion responses of the model align with reference results.
3 August 2026 in Clean Energy Science and Technology
This study experimentally investigates the hydrodynamic response of a modular floating photovoltaic (FPV) system, where individual floaters behave as rigid bodies, and global responses are governed by connector configurations (fixed and flexible connectors) under regular waves. The effects of wave period, water depth, and bottom profile variation are examined. To represent hydroelasticity effects, two different models were developed: a fully rigidly connected array and a hybrid system combining flexible and rigid connectors. The results revealed that flexible connectors reduce global load transfer for incoming waves perpendicular to their rotational axis but introduce higher variability in heave and pitch, whereas rigid connectors produce more coherent motion with higher mean tension. Heave response is primarily governed by resonance and depth-dependent effects. In contrast, pitch response is driven by wave steepness, where larger surface slopes induce stronger differential loading. Bottom profile variation further increases spatial non-uniformity in both responses. Taut mooring systems induce overwash that may affect measurements, highlighting the need to separate mooring and structural models. Although based on a two-dimensional setup, the results provide qualitative insights, supporting further coupled experimental and numerical analyses.