22 September 2016 in Scientific Reports
Two-dimensional arrays of plasmonic nanoparticles at interfaces are promising candidates for novel optical metamaterials. Such systems materialise from ‘top–down’ patterning or ‘bottom–up’ self-assembly of nanoparticles at liquid/liquid or liquid/solid interfaces. Here, we present a comprehensive analysis of an extended effective quasi-static four-layer-stack model for the description of plasmon-resonance-enhanced optical responses of such systems. We investigate in detail the effects of the size of nanoparticles, average interparticle separation, dielectric constants of the media constituting the interface and the nanoparticle position relative to the interface. Interesting interplays of these different factors are explored first for normally incident light. For off-normal incidence, the strong effects of the polarisation of light are found at large incident angles, which allows to dynamically tune the reflectance spectra. All the predictions of the theory are tested against full-wave simulations, proving this simplistic model to be adequate within the quasi-static limit. The model takes seconds to calculate the system’s optical response and makes it easy to unravel the effect of each system parameter. This helps rapid rationalization of experimental data and understanding of the optical signals from these novel ‘metamaterials’, optimised for light reflection or harvesting.
1 April 2021 in Solar Energy Materials and Solar Cells
29 August 2024 in Nano Letters
4 January 2021 in Journal of the Optical Society of America B
We report an ultrabroadband perfect metamaterial absorber, comprising a two-dimensional array of a hemi-ellipsoid shaped metallo-dielectric multilayered structure. What we believe, to the best of our knowledge, is an unprecedented average absorbance of is theoretically demonstrated in the 300 to 4500 nm spectral range at normal incidence. We use 20 pairs of molybdenum–germanium metallo-dielectric layers with tungsten as the ground metal placed on a silicon substrate. Our design is polarization-independent as well as angle-insensitive (up to 60°), making it a perfect “superabsorber.” Theoretical modeling based on effective medium theory validates our full-wave simulation results. The figure-of-merit calculations suggest that our superabsorber can outperform recently reported broadband absorbers. The proposed design has potential application in thermophotovoltaics for solar energy harvesting.
8 February 2021 in Applied Optics
Passive all-weather windows, capable of selectively transmitting visible and infrared solar radiation, could help in bringing down fossil-fuel energy consumption globally by reducing the carbon footprint of typical air-conditioning systems for buildings and motor vehicles. Here, we report on designing metal–insulator–metal thin-films for application in passive windows, optimized for different climatic conditions. We analyze designs comprising different noble metals as well as their relatively inexpensive alternatives. By finding an optimal choice of materials and thicknesses of the metal and dielectric layers, our lithography-free simple design can provide all-weather solutions for passive windows with desired visible and infrared transmission/blocking capability. Obtained theoretical results agree well with full-wave simulations. Thus, our proposed designs enable developing low-cost, ultra-thin (thickness: 47–85 nm), polarization-independent, angle-insensitive (up to 83 deg), and large-area-compatible passive windows with improved solar-radiation control for different weather/climatic conditions. The figure-of-merit calculation shows that the relatively inexpensive metals used in our passive glasses can outperform industry-standard commercial glasses and previously reported infrared-blocking plasmonic glasses.
8 May 2025 in Nano Letters