This paper describes the chemical deproteinization process of natural rubber latex (NRL) using chemical denaturants namely urea and sodium dodecyl sulfate (SDS). Commercial high ammoniated natural rubber latex (HANRL) was incubated with both denaturants – urea and SDS for selected period of time before centrifugation and characterization. The role of SDS in NRL deproteinization process was further elucidated by manipulating the concentration of SDS at 0.3 phr and 0.5 phr during the incubation process. It was found that the physical properties of NRL especially stability, were governed by the amount of SDS, whereby higher concentration of SDS used led to greater NRL stability. However, too much concentration of SDS in the system might cause detrimental effect on the properties of low protein NRL. The effects of additional anionic surfactant namely potassium laurate on the physical properties of low protein NRL and its stabilization were also scrutinized. Characterizations include nitrogen determination by Kjeldahl method, zeta potential, and morphological analysis by Field Emission Scanning Electron Microscopy (FESEM).
2 June 2024 in Journal of Advanced Research in Applied Mechanics
Poly(methyl methacrylate) (PMMA) grafted natural rubber (NR) latex was successfully prepared and solely exploited even at high MMA concentration (1.5 mol/kg-rubber) to make coherent and uniform vulcanized films without blending with other polymer to achieve excellent physical properties. High ammonia natural rubber (HANR) latex was subjected to graft-copolymerization with methyl methacrylate (MMA) monomer in the presence of tert-butyl hydroperoxide (TBHP) and tetraethylenepentamine (TEPA). High conversion, i.e., 85.12 mol%, and grafting efficiency, i.e., 92.70 mol%, were obtained at 1.5 mol/kg-rubber MMA. The resulting gross PMMA grafted NR (1.5PMMA) latex was then compounded, dipped, and vulcanized to produce thin films. The tensile strength and modulus at 300 percent (M300) of vulcanized 1.5PMMA film were superior to vulcanized HANR film by 1-fold. While elongation at break (EB) was identical to each other due to the high gel content in both vulcanized films. Besides, the vulcanized 1.5PMMA film absorbed less oil compared to HANR film. The thermal stability of vulcanized 1.5PMMA film was found to be higher than that of vulcanized HANR film. Hence, it can be deduced that controlling the graft-copolymerization of PMMA in NR latex is the key to produce coherent thin films with improved properties at higher PMMA content.